2024 Audi Q5 S Line 45 Tfsi Mhev Quat SA 2.0L Petrol · WD24 ANR

The absence of any DVSA MOT entries means there is currently no documented evidence of roadworthiness for this 2024 Audi Q5 S line; without a recorded pass, advisory or failure, the vehicle’s compliance with statutory safety and emissions standards cannot be confirmed. This lack of data is the defining mechanical narrative – it leaves the buyer without an objective baseline of the car’s condition as judged by an independent inspection regime. Mileage has not been disclosed, so no quantitative comparison to the vehicle’s age can be made. A 2024 model would typically have accumulated a measurable annual mileage and, under UK regulations, would be due for its first MOT after three years of registration. The missing mileage figure, combined with the absent MOT record, prevents any inference about usage intensity, wear progression or potential over‑kilometre stress on engine, transmission or chassis components. Given the void in recorded MOT outcomes, a comprehensive pre‑purchase examination is essential. Inspect the suspension system for play in the front wishbones, worn bushings or cracked coil springs, and listen for clunking or knocking when traversing uneven road surfaces. Examine the braking assembly for uneven disc thickness, glazed pads or any signs of fluid leakage around the caliper pistons, and test the pedal for consistent travel and firm feel without pulsation. Verify that all electronic aids—adaptive cruise control, lane‑keeping assist and the MHEV hybrid control unit—operate without warning messages, and check for any oil or coolant seepage around the engine bay, particularly near the turbocharger inlet and the front‑right valve cover gasket. Before committing, request a current MOT test to obtain an official safety and emissions assessment, and obtain any available service documentation that can corroborate routine maintenance. Ensure the vehicle is registered and taxed for UK road use, and be prepared for the possibility that an initial MOT may reveal defects that were not captured in the existing record. A thorough mechanical inspection, coupled with a fresh MOT, will provide the concrete evidence needed to gauge the car’s true roadworthiness.