2012 Fiat 500 1.2L Petrol · WM12 ELX

This 2012 Fiat 500 presents a stable and consistently clean maintenance trend, with its most recent MOT on 14 January 2026 at 42,809 miles recording zero defects. Every test in the five-year history returned a pass with no advisories or failures, indicating diligent upkeep and no recurring mechanical faults. The absence of any flagged items across consecutive annual tests suggests the vehicle has been properly maintained rather than merely patched through its MOT. The mileage accumulation is notably low for a 14-year-old car, averaging roughly 3,058 miles per year. Between the January 2026 test and the December 2024 test, the car covered just 1,024 miles over approximately 13 months, pointing to very light use or possibly extended periods of standing. The annual increments between earlier tests were similarly modest, ranging from around 1,400 to 1,600 miles per year, with no sudden spikes in accumulation. Such low mileage reduces wear on consumables and drivetrain components, though prolonged inactivity can introduce its own concerns. Despite the clean MOT record, a buyer should still inspect the tyre sidewalls for age-related cracking, as low-mileage cars often need replacement due to deterioration rather than tread wear. The brake discs and pads deserve close examination, since infrequent use can lead to surface corrosion on discs and sticking calipers that a single annual test may not fully expose. Suspension bushes and coil springs should be checked for perishing, particularly if the vehicle has sat unused for extended periods between these test dates. Underneath, inspect the exhaust system and subframe for corrosion, as even low-mileage city cars can suffer from moisture ingress and road salt damage during long stationary periods. The door sills and wheel arches warrant a careful look for any early signs of structural rust. A short test drive at varying speeds will reveal whether the steering, gearbox, and clutch operate smoothly, confirming that the clean paper record translates to sound mechanical condition in practice.