2008 Mercedes-Benz A-Class 1.5L Petrol · WR08 HTL

The overall roadworthiness of the 2008 Mercedes A-Class is currently in question, as the vehicle has not maintained its performance through a single, consistent MOT test. The most recent inspection on 2026-04-24 failed on the Offside Front Wheel bearing, with the tester flagged that the bearing was rough when rotated. This indicates a breakdown in the suspension system, a critical component that must be addressed before the vehicle can be driven again. The failure of the Offside Front Wheel bearing is a structural risk that is not resolved by routine maintenance; it suggests a failure in the bearing itself, which requires professional assessment and potential replacement. The mileage trajectory reveals a significant gap between the vehicle's age and its recorded use. At 45,785 miles, the car is approximately 18 years old with 2,544 miles per year. This is considered low mileage for a vehicle of this age, suggesting either very light usage or a prolonged period of inactivity. However, the gap between the 2026-04-24 test and the 2024-04-18 test is not filled by steady accumulation but rather by a sudden drop in mileage, which is unusual for a vehicle of this age. This suggests that the vehicle was likely taken off the road or driven very little between the two tests, potentially leading to a lack of maintenance that could have exposed structural weaknesses over time. Given the recurring faults, particularly the structural failure of the wheel bearing and the suspension components, a buyer should inspect the vehicle in person to assess the condition of the suspension bushings, coil springs, and brake discs. The history of failures on the Offside Front and Offside Rear wheel bearings indicates that the suspension is not in good condition and may require immediate replacement. Similarly, the corrosion of the brake pipes and the wear on the brake pads and springs suggest that the braking system is compromised and may need to be serviced or replaced. A thorough visual inspection of the suspension, brakes, and undercarriage is essential to determine if the vehicle meets the safety requirements for roadworthiness.