2019 Audi A4 Technik 35 Tfsi 2.0L Petrol · X11 FAL

The vehicle’s most recent MOT test, conducted on 30 October 2025 at 63,052 miles, confirms it remains roadworthy with no defects recorded. This represents a stable maintenance trend over the past five annual tests, all of which passed without fail. The absence of advisories or recurring issues suggests the vehicle has been consistently compliant with MOT standards, though this does not preclude hidden wear or deferred maintenance beyond the tester’s scope. The most recent test was conducted just under nine months ago, which is within the standard MOT validity period, though buyers should verify whether the vehicle has undergone any interim servicing or repairs not documented in the record. The mileage progression indicates typical usage for a vehicle of this age, averaging approximately 9,000 miles annually. There are no unusual gaps or spikes in the record—each test was conducted within a few weeks of the previous one’s due date, and the mileage increments are consistent. The vehicle’s history lacks extended periods of inactivity or rapid mileage accumulation, which might suggest either regular driving habits or a vehicle that has been stored but moved periodically. However, the lack of service records means potential wear on non-MOT-checked components, such as timing belts or transmission fluid, cannot be confirmed. Given the clean MOT history, the primary focus for an in-person inspection should centre on high-wear items that fall outside MOT testing. The suspension—particularly coil springs, bushes, and dampers—should be examined for uneven wear or fluid leaks, as these are critical for handling and safety despite not being MOT-tested. Brake components, while not flagged in past tests, warrant scrutiny: rear binding was not recorded, but uneven pad thickness or warped discs could indicate past neglect. Structural integrity, especially around wheel arches and underbody, should be checked for corrosion, as TFSI engines are prone to rust in wet climates. Finally, the exhaust system’s integrity should be verified, as catalytic converter failures or leaks are common in this model range and often go undetected without a scan tool.