2019 Audi A1 1.0L Petrol · YC05 YAS

A consistent record of clean MOT certificates since 2023 defines the recent roadworthiness of this vehicle, following a period in late 2022 where tyre wear was flagged. While the 2022 inspection noted advisories regarding nearside front and offside front inner tyre wear, the subsequent tests on 2023-12-01, 2024-12-03, and the most recent pass on 2025-11-29 show no recorded defects or recurring advisories. This indicates that the previous issues with tyre tread depth and edge wear were addressed, resulting in a stable and defect-free testing trend over the last three years. The vehicle has covered 45,625 miles over its seven-year lifespan, which equates to an average annual usage of approximately 6,518 miles. This mileage profile is consistent with typical light-to-moderate usage for a vehicle of this age. Mechanically, this level of accumulation suggests that while major drivetrain components may not have reached high-mileage wear thresholds, consumables such as brake pads, discs, and suspension bushes will have undergone standard operational cycles. The steady mileage accumulation suggests the vehicle has been in regular use rather than sitting stationary for extended periods, which helps mitigate risks associated with long-term stagnation. Given the specific advisory regarding tyre wear on the offside front inner edge and nearside front centre wear in 2022, a prospective buyer should pay close attention to the current condition of the tyre treads and the alignment of the front axle. Uneven wear on the inner edges often points to incorrect camber or toe settings. During a test drive, listen for any rhythmic thumping or humming noises from the front end, which could indicate unevenly worn tyres or wheel bearing issues. Additionally, check for any steering pull to one side when the vehicle is travelling on a straight, level road, as this would be a direct symptom of the alignment issues previously noted. While the recent history is clear of structural or mechanical failures, the focus should remain on the consumables that were previously highlighted. Beyond the tyres, ensure that the braking system feels consistent; although no brake defects were recorded, the previous tyre wear could be linked to driving habits or suspension geometry that affects overall stability. A thorough check of the tyre tread depth across all four corners is advised to ensure the vehicle currently meets the legal requirements and matches the clean status of the most recent 2025 MOT pass.