2008 MINI 1.4L Petrol · YY08 UVO

The vehicle presents a mixed maintenance profile with a recent trend toward resolving specific mechanical failures, though its long-term history shows recurring issues. The most recent test on 27 September 2024 at 108,843 miles initially resulted in a failure due to a missing nearside rear road wheel fixing and an inoperative engine malfunction indicator lamp. However, the vehicle passed immediately following these repairs. This follows a period of relatively stable testing between 2019 and 2024, though the 2024 MOT is now nearly two years out of date relative to the current date of 29 July 2026, meaning the vehicle's current legal roadworthiness cannot be confirmed without a fresh inspection. The mileage accumulation is consistent with an 18-year-old vehicle, averaging approximately 6,000 miles per year. The data shows steady usage, with a notable jump between July 2017 at 77,888 miles and July 2016 at 65,689 miles, followed by a very consistent climb through the 2020s. The lack of significant gaps in the testing schedule suggests the vehicle has been in regular use rather than sitting idle for extended periods. A prospective buyer should prioritize a thorough inspection of the vehicle's structural integrity and steering components. The record shows a history of corrosion, specifically an advisory in 2021 regarding the integral body structure and a 2023 advisory for a corroded front suspension component. Repeated issues with steering rack gaiters between 2016 and 2020 suggest these components may require close monitoring to prevent dirt ingress and subsequent rack failure. The braking system and exhaust emissions also warrant attention. While the 2023 test noted a worn rear brake disc, the history of excessive carbon monoxide and hydrocarbon emissions between 2017 and 2018 indicates previous engine management or exhaust issues. Given the recent failure of the engine malfunction indicator lamp in 2024, a diagnostic scan should be performed to ensure all sensor readings and emissions controls are functioning correctly. Finally, verify the condition of the tyres and wheel fixings, as the record shows a pattern of uneven tyre wear and missing hardware.