IsItAGoodCar
Year Range Hub

1973 Austin Maxi

Browse our directory of 1973 Austin Maxi vehicles. Access instant MOT history reports, tax status, and reliability insights for any registration listed below.

Registration Directory

Showing registrations 1–8 of 8 for the 1973 Austin Maxi. Select any plate for an instant vehicle history check.

Common Problems & Reliability

1
Serious
2
Moderate
0
Minor

The 1973 Austin Maxi has 3 known issues. 1 of these are classified as serious faults that could be expensive to repair. 2 are moderate concerns worth inspecting before purchase.

Front Subframe and Sill Structural Corrosion

Serious

Like its BMC and British Leyland siblings, the Austin Maxi suffers from severe structural corrosion in salt-belt UK road conditions. The steel front subframe that cradles the transverse E-Series engine is prone to rusting from the inside out, particularly in the hollow boxed section between the suspension lower wishbone pivot mounts. Simultaneously, road grime and spray rot the outer sills, the lower A-pillar bases, the rear trailing arm mounts, and the tailgate seal flange. Subframe perforation leads to MOT roadworthiness failure and risks front suspension collapse if left unrepaired.

Symptoms: Flaking rust, soft metal, and perforations visible on the front subframe between suspension arm mounts, Crumbly outer and inner sills, particularly where the front sill meets the lower A-pillar...

Est. repair cost: £450–£1,400 for structural subframe fabrication, outer sill replacement, and rustproofing

Early Cable-Operated Five-Speed Gearbox Vagueness and Linkage Wear

Moderate

Early Austin Maxi 1500 models from 1969 to late 1970 utilized a flexible cable-operated gear selector mechanism that is notorious for imprecise, rubbery shift quality. Over time, the internal selector cables stretch, their outer casings fray, and the plastic quadrant bushes perish, making gear selection extremely difficult and prone to missing slots or selecting reverse inadvertently. In addition, the primary drive oil seal behind the flywheel can harden and leak engine oil into the clutch bellhousing, causing severe clutch slip. British Leyland replaced the cable system with a rigid rod-operated linkage in October 1970, which is the preferred specification.

Symptoms: Extremely vague, sloppy gear selection with difficulty locating second or reverse gear, Gear lever feels rubbery with excessive free play across all gate positions...

Est. repair cost: £200–£600 for linkage bushing overhaul, rod-change conversion, or gearbox reconditioning

Hydrolastic and Hydragas Suspension Fluid Leaks and Pressure Loss

Moderate

The Moulton interconnected fluid suspension (Hydrolastic on 1969–1978 models; Hydragas on 1978–1981 models) provides an exceptionally supple ride but degrades as displacer units age. Flexible connecting hoses perish and crack, metal fluid pipework running under the floor corrodes, and displacer internal rubber diaphragms or nitrogen gas spheres slowly lose pressure over decades of use. When pressure drops, the car sags towards the bump stops on one side, destroying ride comfort, causing harsh bottoming-out on road undulations, and severely compromising handling stability. Recharging requires a specialist Churchill-style displacement pump.

Symptoms: Car leaning or sitting noticeably low at one corner or across one entire side, Excessively bouncy, underdamped ride quality or harsh, solid suspension over bumps...

Est. repair cost: £180–£500 for specialist system pump-up, flexi-pipe replacement, or refurbished displacers

View detailed Austin Maxi fault guide

Buying Tips for the 1973 Austin Maxi

  • Prioritise a post-October 1970 1750cc model with the factory rod-change gearbox; the early 1969-1970 1500cc cable-change transmission is notoriously vague and rubbery, making gear engagement difficult and parts scarce.
  • Check the structural condition of the front subframe between the suspension mounting arms, the front ends of the sills, the rear suspension mountings, and the lower tailgate aperture for severe rust.
  • Test the fluid suspension: pre-1978 cars utilise interconnected Hydrolastic displacer units while 1978-onwards cars use Hydragas units; confirm the car sits level at all four corners and check displacer flexi-hoses for weeping fluid.
  • Verify engine maintenance history on the overhead-cam E-Series unit: confirm frequent 3,000 to 5,000-mile engine oil and filter changes, as the sump-mounted gearbox shares engine oil and neglected lubrication destroys bearings.
  • Inspect the interior seat folding mechanisms and unique Maxi trim; the fold-flat seating mechanism must latch securely, and replacement interior fabrics, dashboards, and exterior bumpers are exceptionally difficult to source.

Check Any Vehicle

Don't see your specific car listed? Enter any UK registration number for an instant vehicle history check — including MOT history, tax status, finance check, and write-off data.

Free Vehicle Check