IsItAGoodCar
UK Reliability Directory

Porsche 968

Production Years: 1992 - 19953 Documented Faults

The Porsche 968 represents the ultimate evolution of Porsche front-engined, rear-wheel-drive transaxle bloodline that originated with the 924 and 944. Featuring roughly 80 percent newly engineered components compared to the outgoing 944 S2, the 968 was penned by Harm Lagaay and styled with exposed pop-up headlamps echoing the flagship 928. Beneath the bonnet sat a massive 3.0-litre four-cylinder engine (M44/43)—one of the largest four-cylinder engines fitted to any production car—producing 237 bhp and 225 lb-ft of torque, equipped with Porsche innovative VarioCam variable valve timing. Paired with a rear-mounted six-speed manual gearbox or four-speed Tiptronic, the transaxle layout delivered near-perfect 50:50 weight distribution and peerless chassis feedback. In the UK, the lightweight 968 Club Sport achieved legendary critical acclaim. Today, the 968 is a rare, rewarding classic that requires disciplined upkeep of its VarioCam tensioner and balance belts.

Check a specific car?

Got a registration for a 968? Get an instant MOT and history report.

Common Faults & Reliability

These are the most common documented problems for the Porsche 968, sorted by their typical impact and frequency.

VarioCam Camshaft Chain Tensioner Pad Wear

high severity

The 3.0-litre M44/43 engine utilizes a timing belt to drive the exhaust camshaft, which in turn drives the intake camshaft via a small chain governed by the hydraulic VarioCam tensioner. The tensioner incorporates composite plastic ramp pads that guide the connecting chain. Over time and high mileage, these plastic pads become brittle, groove deeply, and fracture. If the pad disintegrates, the timing chain can jump teeth or snap, resulting in catastrophic piston-to-valve contact and destroyed cylinder heads.

Est. repair cost:£700–£1,600 (preventative pad & chain) / £4,000–£7,000 (head rebuild)

Power Steering Pump Fluid Leaks and Hydraulic Rack Failure

medium severity

The engine-driven hydraulic power steering pump on the 968 is prone to seal deterioration and weeping around the front shaft seal and high-pressure hose unions. Fluid leaks frequently drip down onto hot exhaust manifolds and lower suspension wishbone bushes. If hydraulic fluid runs low, the pump overheats, cavitates, and suffers total mechanical seizure, which throws off the drive belt and makes steering the heavy front-engined sports car exceptionally difficult.

Est. repair cost:£350–£850

Transaxle Pinion Bearing Wear and Synchromesh Deterioration

high severity

The rear-mounted six-speed Getrag manual transaxle is subjected to high torque loads from the 3.0-litre four-cylinder powerplant. Over high mileages or aggressive track usage, the transaxle pinion shaft taper roller bearings develop pitting and wear, creating a distinct droning whine under acceleration and overrun. Additionally, second gear brass synchromesh rings wear out, causing gear selection resistance and crunching on brisk downshifts.

Est. repair cost:£1,200–£2,800

Browse by Production Year

Select a specific year to view detailed registration directory lookup and annual MOT history reports for the Porsche 968.