1983 Rolls Royce Silver Spirit 6.8L Petrol · WMH 1
1983 Rolls Royce Silver Spirit (6.8L, petrol). First registered 17 Nov 1983. Recorded mileage 103,301 miles. MOT expired on 07 Sept 2024.
- Make & Model
- ROLLS ROYCE SILVER SPIRIT
- Year / Origin
- 1983 · Bristol
- Safety Recall
- Unknown
- MOT Status
- Expired on 07 Sept 2024
- Road Tax
- —
- Recorded Mileage
- 103,301 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 6.8L
- Reliability Guide
- Common Faults
AI-generated interpretation of this vehicle’s MOT record — not an official statement and not a substitute for an independent inspection.
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
WMH 1 Key Findings
- 2 MOT tests recorded
- Latest MOT passed on 09/09/2023
- 103,301 miles recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
WMH 1 MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
2 MOT tests are recorded for this 1983 Rolls Royce Silver Spirit (WMH 1) between June 2022 and September 2023.
The record contains 2 passes and 0 failures.
No failures or advisories appear anywhere in the recorded tests, so the documented MOT record is relatively clean.
WMH 1 Mileage History
- 11/06/2022103,220 mi
- 09/09/2023103,301 mi+81 mi
Average of roughly 65 miles per year across 2 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Rolls-Royce Rolls-Royce Silver Spirit
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: ROLLS ROYCE SILVER SPIRIT
Known issues reported by owners and MOT testers.
- High-Pressure Hydraulic Braking Accumulator and Mineral Oil System Failure(Serious)
The SZ generation employs a complex Citroën-licensed dual-circuit hydraulic system operating at over 2,000 psi to power the braking system and rear self-levelling suspension. The nitrogen-charged brake accumulator spheres lose pressure over 5 to 8 years, resulting in a rock-hard brake pedal, prolonged pump cycle times, and reduced reserve braking capacity. If brake fluid types are mistakenly interchanged (such as adding standard DOT fluid into mineral oil systems), internal rubber seals dissolve, triggering catastrophic system failure.
- Rear Hydraulic Suspension Gas Sphere Deterioration and Ride Harshness(Moderate)
The hydropneumatic rear self-levelling suspension relies on two nitrogen-filled gas spring spheres connected to rear hydraulic struts to provide spring compliance and damping. Over time, nitrogen gas permeates across the internal rubber diaphragm, reducing the gas volume until the sphere hydraulically locks solid. This eliminates rear suspension compliance, transmits harsh road shocks directly into the monocoque body, and causes rapid failure of rear subframe bushes and lower shock absorber mountings.
- Exhaust Manifold Cracking and Gasket Blow-By(Moderate)
The 6.75-litre L-Series V8 produces substantial thermal load within a heavily enclosed engine compartment. Over thousands of heat cycles, the cast-iron exhaust manifolds warp and stress their mounting studs, causing the composite manifold gaskets to blow out or the cast manifolds to develop hairline fatigue fractures. Remediation requires extracting seized or snapped studs from the aluminium cylinder heads in extremely tight engine bay clearances, demanding substantial specialist labour.
Similar Vehicles
Plate Neighbors
Batch Registration Neighbors (WMH Series)
Vehicles registered in the same regional DVLA batch as WMH1.
BMW
218
JAGUAR
XJS
VOLKSWAGEN
TRANSPORTER
JAGUAR
E-TYPE
MERCEDES-BENZ
GLA 250 AMG LINE PREMIUM E A
MG
MIDGET 1500
LAND ROVER
RANGE ROVER SPORT
LEXUS
IS
LAND ROVER
RANGE ROVER SPORT
RILEY RMA
HONDA
CB 400 F
MITSUBISHI
L200
ROLLS ROYCE SILVER SPIRIT Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1983 model year cars.
- High-Pressure Hydraulic Braking Accumulator and Mineral Oil System FailureSerious
The SZ generation employs a complex Citroën-licensed dual-circuit hydraulic system operating at over 2,000 psi to power the braking system and rear self-levelling suspension. The nitrogen-charged brake accumulator spheres lose pressure over 5 to 8 years, resulting in a rock-hard brake pedal, prolonged pump cycle times, and reduced reserve braking capacity. If brake fluid types are mistakenly interchanged (such as adding standard DOT fluid into mineral oil systems), internal rubber seals dissolve, triggering catastrophic system failure.
- Rear Hydraulic Suspension Gas Sphere Deterioration and Ride HarshnessModerate
The hydropneumatic rear self-levelling suspension relies on two nitrogen-filled gas spring spheres connected to rear hydraulic struts to provide spring compliance and damping. Over time, nitrogen gas permeates across the internal rubber diaphragm, reducing the gas volume until the sphere hydraulically locks solid. This eliminates rear suspension compliance, transmits harsh road shocks directly into the monocoque body, and causes rapid failure of rear subframe bushes and lower shock absorber mountings.
- Exhaust Manifold Cracking and Gasket Blow-ByModerate
The 6.75-litre L-Series V8 produces substantial thermal load within a heavily enclosed engine compartment. Over thousands of heat cycles, the cast-iron exhaust manifolds warp and stress their mounting studs, causing the composite manifold gaskets to blow out or the cast manifolds to develop hairline fatigue fractures. Remediation requires extracting seized or snapped studs from the aluminium cylinder heads in extremely tight engine bay clearances, demanding substantial specialist labour.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.