IsItAGoodCar
Reliability Guide

Common Problems with the
2026 Kia EV9 (MV)

We've identified 2 known issues that can affect the 2026 Kia EV9 (MV). 1 of these are serious faults that could be expensive to repair.

2
Known Issues
1
Serious
1
Moderate
0
Minor

All Known Issues

High-Voltage Traction Battery Cell Voltage Imbalance and Module Failure

SeriousElectrics & Electronics

Flagship 99.8kWh high-voltage battery packs on the EV9 can develop individual lithium-ion pouch cell voltage drop and internal module degradation. Faulty cell groups fail to balance properly, triggering battery management error code P1AA700. Drivers observe erratic state-of-charge readings where home AC charging abruptly cuts out around 80% or leaps instantly to 100%, alongside sudden range collapses where full-charge estimates drop from over 300 miles to under 100 miles. Affected vehicles drop into limp mode, requiring dealer diagnostic isolation and replacement of complete high-voltage battery modules.

Est. Repair Cost: £1,200–£8,000
Warning Signs:

High-voltage system malfunction warning and turtle mode power restriction on the dash, High-voltage charging cutting out prematurely at 80% or jumping unexpectedly to 100%, Real-world driving range drastically collapsing by more than half after a full charge

What to Inspect:
  • Charge the vehicle to full and check that the predicted range on the instrument cluster matches factory WLTP expectations (over 280–300 miles)
  • Connect an OBD-II diagnostic scanner to check high-voltage cell voltages for any outlier delta exceeding 50mV across modules
  • Confirm the remaining balance of Kia's 8-year/100,000-mile high-voltage battery warranty with an authorised dealer
Verified by IsItAGoodCar Research TeamUpdated

Digital Instrument Cluster Blanking and PMIC Thermal Noise Reset (Recall R/2026/139)

ModerateElectrics & Electronics

The panoramic digital instrument cluster display on early EV9 models can suffer from sluggish responsiveness, freezing, and spontaneous rebooting while driving. The fault is caused by power management integrated circuit (PMIC) electrical noise inducing falsely elevated temperature readings on the cluster circuit board, which trips the processor's thermal protection cutoff. Activating the turn indicators can trigger the cluster to black out completely or turn the Blind View Monitor (BVM) camera feed green, depriving the driver of the digital speedometer and warning lamps in violation of UK construction and use standards.

Est. Repair Cost: £150–£1,100
Warning Signs:

Digital speedometer and instrument cluster freezing or going completely blank after startup, Blind View Monitor (BVM) display showing a distorted or solid green camera screen when indicating, Delayed cluster response and spontaneous system reboots while the vehicle is in motion

What to Inspect:
  • Start the vehicle and observe cluster boot time; engage left and right turn indicators to ensure the camera feeds render clearly without lag
  • Confirm via the Kia infotainment settings that the system running software is updated to the latest over-the-air (OTA) build
  • Check dealer service records to confirm recall R/2026/139 cluster software update has been applied
Verified by IsItAGoodCar Research TeamUpdated
Official Recalls & Reference Documents:

Buying Tips for 2026 Kia EV9 (MV)

  • Check the status of the Integrated Charging Control Unit (ICCU) recall and verify that all high-voltage software updates have been completed by an authorised Kia dealer
  • Inspect the low-voltage 12V auxiliary battery condition, as complex telematics and digital key functions can deplete the 12V battery if the car is parked for extended periods
  • Test the operation of all digital display screens, including the panoramic triple-screen dashboard and digital side mirrors (where fitted on top specs)
  • Check tyre condition and alloy rim edges for kerb damage, as the EV9 substantial 2.6-tonne kerb weight accelerates tyre shoulder wear in tight urban turns
  • Verify the power-folding mechanisms on the second and third-row passenger seats to confirm motor hinges operate smoothly