IsItAGoodCar
Reliability Guide

Common Problems with the
2007 Mazda 6 (GH)

The GH Mazda 6 launched in the UK with sharp handling and stylish design, offering a driver-focused alternative to the Ford Mondeo and VW Passat. The petrol engines proved exceptionally reliable.

What changed for 2007

  • •UK launch of second-generation Mazda 6
  • •Sharp handling and stylish Kodo design
  • •1.8, 2.0, and 2.5 naturally aspirated engines
  • •Saloon, Hatchback, and Estate body styles

Common MOT watch-outs

  • !Rear arch and sill corrosion
  • !Steering rack play
  • !Bose amplifier moisture damage
4
Known Issues
2
Serious
2
Moderate
0
Minor

All Known Issues

Rear Arch, Sill and Underbody Corrosion

SeriousBodywork & Rust

GH cars can rust around the rear arches, sill ends and underbody mounting points long before the cabin or paintwork looks especially shabby.

Est. Repair Cost: £400–£2,000
Warning Signs:

Bubbling paint on rear arches, Flaky underseal, MOT corrosion advisories

What to Inspect:
  • Inspect the rear arches inside and out
  • Check sill ends and jacking points
  • Look underneath for heavy rust around the rear subframe
Verified by IsItAGoodCar Research Team

Diesel DPF and Oil Dilution Trouble

SeriousEngine

Short-trip use can overload the DPF regeneration strategy on the 2.0 and especially 2.2 diesels, leading to rising oil levels, warning lights and turbo stress.

Est. Repair Cost: £300–£2,500
Warning Signs:

DPF warning light, Rising oil level on dipstick, Limp mode after town use

What to Inspect:
  • Check the dipstick level carefully
  • Ask what kind of journeys the car did
  • Look for invoices for DPF cleaning or turbo work
Verified by IsItAGoodCar Research Team

Bose Audio Amplifier Internal Failure and Parasitic Battery Drain

ModerateElectrics & Electronics

On models equipped with the factory premium Bose audio system (common on Sport and TS2 trims), the digital sound processor amplifier mounted under the driver's seat on UK right-hand drive cars suffers from thermal fatigue and moisture-induced component degradation. Because the amplifier is connected to the CAN-bus network and remains live even when the ignition is switched off, internal short circuits cause harsh machine-gun crackling, sudden bursts of white noise, complete audio failure, or a parasitic battery drain that flattens the 12V battery overnight. Specialist mail-in board-level rebuilds or replacement units are required.

Est. Repair Cost: £150–£450
Warning Signs:

Complete absence of audio output from all speakers, Loud machine-gun popping or crackling through door speakers, Sudden blasts of white noise when opening doors, Flat 12V vehicle battery after being parked overnight

What to Inspect:
  • Test the audio system across all sources to verify clear sound output from every speaker
  • Listen for popping, buzzing or static through speakers when unlocking or opening doors
  • Check the carpet beneath the driver seat for dampness or green corrosion on amplifier plugs
  • Ask if the car has experienced unexplained 12V battery drain when left parked
Verified by IsItAGoodCar Research TeamUpdated

Front Lower Suspension Control Arm Bushing Wear and Ball Joint Play

ModerateSuspension & Chassis

Second-generation Mazda 6 models experience significant front suspension deterioration on UK roads due to speed cushions, potholes and road grime. The rear compliance bushes on the front lower control arms perish and unbond, while the integrated lower ball joint dust covers split and allow grit ingress, causing excessive metal-to-metal play. DVSA MOT test data identifies suspension arm pins, bushes and joints as the single most frequent failure point on GH cars (recorded on over 13% of tests). Because the lower ball joint is pressed into the wishbone, garages generally replace the complete arm assembly followed by four-wheel alignment.

Est. Repair Cost: £220–£500
Warning Signs:

Clunking or knocking noises over speed bumps and rough roads, Vague steering response or wandering on uneven road cambers, Uneven tyre tread wear across inner edges of front tyres, MOT failure for excessive play in suspension ball joint or split dust cover

What to Inspect:
  • Listen for knocking sounds from the front axle during low-speed steering manoeuvres over bumps
  • Inspect the front lower arm rubber bushes for perishing, tears or oil contamination
  • Check the rubber ball joint boots for splits, weeping grease or loose clips
  • Review past MOT history for recurring suspension arm or bush advisories
Verified by IsItAGoodCar Research TeamUpdated

Buying Tips for 2007 Mazda 6 (GH)

  • Inspect the rear arches, sill ends and rear subframe properly; tidy-looking cars can still be crusty underneath.
  • A petrol is the easy recommendation. Diesel cars need evidence of regular long runs and prompt oil servicing.
  • Check the boot floor, door bottoms and MOT history for repeat corrosion advisories.