IsItAGoodCar
Reliability Guide

Common Problems with the
2003 Porsche Cayenne (955/957)

The 2003 launch of the original Cayenne (955) was highly controversial but arguably saved Porsche from bankruptcy. Sharing a platform with the VW Touareg, it was incredibly capable off-road but blighted by early V8 engine issues.

What changed for 2003

  • •Debut of Porsche's first SUV, the Cayenne (955).
  • •Initial launch featured the 4.5-litre V8 (S) and twin-turbo V8 (Turbo).

Common MOT watch-outs

  • !Failure of the air suspension compressor and leaking struts.
  • !Severe corrosion on the front subframe and brake lines.
3
Known Issues
2
Serious
1
Moderate
0
Minor

All Known Issues

Plastic Coolant Pipe Failure (955 V8)

SeriousCooling System

The original plastic pipes under the intake manifold fail and leak coolant onto the starter motor.

Est. Repair Cost: £1,200–£1,600
Warning Signs:

Sudden coolant loss, Steam from the engine bay

What to Inspect:
  • Look for aluminium pipe upgrade in history
Verified by IsItAGoodCar Research Team

Bore Scoring (4.5 V8)

SeriousEngine

Catastrophic wear to the cylinder liners, most common on early 4.5L V8 engines.

Est. Repair Cost: £6,000–£10,000+
Warning Signs:

Ticking noise, High oil consumption, Smoke from exhaust

What to Inspect:
  • Perform a cold-start check for knocking/ticking
Verified by IsItAGoodCar Research Team

Driveshaft Carrier Bearing Failure

ModerateGearbox & Transmission

The centre support bearing on the cardan shaft fails, causing a thumping noise under the centre console. A near-certain failure point on all 955/957 models.

Est. Repair Cost: £300–£600
Warning Signs:

Thumping under centre console, Vibration during acceleration, Clunking over speed bumps

What to Inspect:
  • Listen for thumping from centre of car
  • Inspect carrier bearing for play
Verified by IsItAGoodCar Research Team

Buying Tips for 2003 Porsche Cayenne (955/957)

  • The 4.5-litre V8 is notorious for cylinder bore scoring, leading to a catastrophic 'ticking' noise and heavy oil consumption; a bore scope is essential.
  • Check the coolant pipes under the intake manifold; the original plastic pipes split and must be replaced with aluminium ones.