1997 Lamborghini Diablo 5.7L Petrol · 666 VLD
1997 Lamborghini Diablo (5.7L, petrol). First registered 19 Sept 1997. Recorded mileage 40,041 miles. MOT expired on 04 Sept 2024.
- Make & Model
- LAMBORGHINI DIABLO
- Year / Origin
- 1997
- Safety Recall
- Unknown
- MOT Status
- Expired on 04 Sept 2024
- Road Tax
- —
- Recorded Mileage
- 40,041 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 5.7L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
666 VLD Key Findings
- 1 MOT test recorded
- Latest MOT passed on 06/09/2023
- 40,041 miles recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
666 VLD MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
1 MOT test are recorded for this 1997 Lamborghini Diablo (666 VLD) between September 2023 and September 2023.
The record contains 1 pass and 0 failures.
The record shows no MOT failures, although 0 advisory notices note items to monitor.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Lamborghini Lamborghini Diablo
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: LAMBORGHINI DIABLO
Known issues reported by owners and MOT testers.
- Single-Plate Clutch Wear and Slave Cylinder Pull-Rod Failure(Serious)
The Diablo's 5.7-litre and 6.0-litre V12 engines transfer up to 457 lb-ft of torque through a single dry-plate clutch. Due to high vehicle mass and heavy low-speed gearing, the clutch disc experiences rapid friction material wear during stop-start UK driving, rarely lasting beyond 20,000 to 25,000 miles. Furthermore, pre-1998 cars employ a pull-type hydraulic slave cylinder mechanism where the internal operating rod is prone to fatigue fractures or hydraulic seal blow-out, suddenly leaving the driver unable to disengage the clutch. Replacing the clutch assembly requires dropping the rear suspension, differential, and V12 powertrain, resulting in substantial specialist labour bills.
- Timing Chain Hydraulic Tensioner Failure and Overrun Rattle(Serious)
Early 1990–1994 Lamborghini Diablo 5.7-litre V12 engines used oil-pressure-fed hydraulic timing chain tensioners that suffered from a dangerous design flaw: engine oil pressure pulsations progressively ratcheted the tensioners tighter against the guide rails until excessive tension caused one or both timing chains to snap. This catastrophic failure resulted in complete valve-to-piston collision, destroying cylinder heads, pistons, and liners. From 1994, Lamborghini superseded these with mechanical ratchet tensioners and issued service bulletins to retrofit earlier engines. In addition, high-mileage Diablos can experience timing chain stretch, producing an audible rattle on the overrun.
- Galvanic Body Corrosion and Steel Spaceframe Rust(Moderate)
The Diablo construction combines hand-beaten aluminium body panels mounted over a rectangular-tube steel spaceframe, with composite carbon-fibre used for the bumpers, sills, front bonnet, and engine cover. Inadequate galvanic barrier protection at the factory allows electrolytic corrosion to occur where the aluminium skin makes direct contact with the steel subframes. When exposed to damp British roads and winter salt spray, moisture is trapped within unsealed seams, causing galvanic blistering of the aluminium paintwork and structural rusting of the tubular steel chassis. Areas worst affected include the lower door bottoms, outer sill mounting points, front boot floor, and fuel filler pocket.
Similar Vehicles
Plate Neighbors
Batch Registration Neighbors (666V Series)
Vehicles registered in the same regional DVLA batch as 666VLD.
LAMBORGHINI DIABLO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1997 model year cars.
- Single-Plate Clutch Wear and Slave Cylinder Pull-Rod FailureSerious
The Diablo's 5.7-litre and 6.0-litre V12 engines transfer up to 457 lb-ft of torque through a single dry-plate clutch. Due to high vehicle mass and heavy low-speed gearing, the clutch disc experiences rapid friction material wear during stop-start UK driving, rarely lasting beyond 20,000 to 25,000 miles. Furthermore, pre-1998 cars employ a pull-type hydraulic slave cylinder mechanism where the internal operating rod is prone to fatigue fractures or hydraulic seal blow-out, suddenly leaving the driver unable to disengage the clutch. Replacing the clutch assembly requires dropping the rear suspension, differential, and V12 powertrain, resulting in substantial specialist labour bills.
- Timing Chain Hydraulic Tensioner Failure and Overrun RattleSerious
Early 1990–1994 Lamborghini Diablo 5.7-litre V12 engines used oil-pressure-fed hydraulic timing chain tensioners that suffered from a dangerous design flaw: engine oil pressure pulsations progressively ratcheted the tensioners tighter against the guide rails until excessive tension caused one or both timing chains to snap. This catastrophic failure resulted in complete valve-to-piston collision, destroying cylinder heads, pistons, and liners. From 1994, Lamborghini superseded these with mechanical ratchet tensioners and issued service bulletins to retrofit earlier engines. In addition, high-mileage Diablos can experience timing chain stretch, producing an audible rattle on the overrun.
- Galvanic Body Corrosion and Steel Spaceframe RustModerate
The Diablo construction combines hand-beaten aluminium body panels mounted over a rectangular-tube steel spaceframe, with composite carbon-fibre used for the bumpers, sills, front bonnet, and engine cover. Inadequate galvanic barrier protection at the factory allows electrolytic corrosion to occur where the aluminium skin makes direct contact with the steel subframes. When exposed to damp British roads and winter salt spray, moisture is trapped within unsealed seams, causing galvanic blistering of the aluminium paintwork and structural rusting of the tubular steel chassis. Areas worst affected include the lower door bottoms, outer sill mounting points, front boot floor, and fuel filler pocket.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.