2008 FORD MONDEO1.8L Diesel

The 2008 Ford Mondeo’s most recent MOT test on 25 May 2023—just three months ago—confirms it remains roadworthy, though the preceding cluster of three failures in May 2023 at identical mileages (127,012 to 127,096) suggests an administrative or procedural anomaly rather than a mechanical trend. No defects were recorded in any of these tests, which implies the vehicle passed all required checks without advisories or major concerns. The last substantive test in August 2020 at 104,703 miles also passed without issues, indicating a stable history of compliance with MOT standards over the past six years. However, the lack of advisories or defects in recent tests does not preclude hidden wear—particularly in components like suspension bushes, coil springs, or brake calipers—which are not always flagged until they reach critical failure points. The recorded mileage of 127,096 miles over 18 years equates to an average of 7,061 miles annually, a rate consistent with typical light-to-moderate usage for this vehicle’s age. The most notable gap occurs between March 2019 (99,024 miles) and August 2020 (104,703 miles), a 15-month period covering 5,679 miles—suggesting either reduced usage or extended periods off the road. The subsequent mileage accumulation between August 2020 and May 2023 (22,393 miles in 2 years and 9 months) is steady but not excessive, ruling out aggressive driving as a factor in accelerated wear. The absence of advisories in any test further implies no urgent structural concerns, though corrosion in wheel arches or underbody areas could develop over time without visible signs. Given the lack of recorded defects, a buyer should prioritise an in-person inspection of suspension components, particularly the rear suspension bushes and coil springs, which are common failure points in this model at this mileage. The repeated MOT failures in May 2023—despite identical mileages—raise curiosity about potential test centre inconsistencies, but no mechanical red flags emerge from the record. Brake discs and calipers should be checked for uneven wear or binding, especially if the vehicle exhibits pulling or reduced stopping efficiency. Finally, the underbody and wheel arches warrant scrutiny for corrosion, as rust can compromise structural integrity without immediate impact on MOT passability. Tyre tread depth and condition, while not flagged in tests, should be verified, as the absence of advisories does not guarantee they have been maintained beyond the minimum legal limits.