2019 Ford Ranger 3.2L Diesel · B25 AAK

A consistently clean MOT record across five consecutive tests, most recently on 10 June 2026, shows that no roadworthiness defects have been recorded for this 2019 Ford Ranger. The absence of advisories or failures over a seven‑year span suggests that, at least at the times of testing, the principal safety‑critical systems – brakes, lights, emissions, and structural components – met the statutory standards. The odometer reads 36 624 mi, which works out to roughly 5 200 mi per year – well below the average for a vehicle of this age. The mileage progression aligns with the regular annual MOT schedule, with no prolonged gaps that would hint at extended periods of storage. Low annual accumulation generally reduces cumulative wear on wear‑items such as brake pads, clutch, and tyre tread, but it also means that any components subject to age‑related degradation (rubber seals, coolant hoses, battery) may have aged more than the mileage alone would suggest. When you inspect the Ranger, pay particular attention to the suspension bushings and coil springs for any creaking or uneven bounce, especially when traversing bumps. Listen for clunking from the front lower control arms or rear leaf‑spring mounts, and feel for any steering pull or vibration that could indicate worn ball joints or tie‑rod ends. Examine the brake discs and pads for uneven wear patterns, scoring, or excessive rust, and test the pedal for consistent firmness without pulsation, which would reveal disc warping or caliper binding. Given the low mileage, also verify the condition of engine seals, coolant hoses, and the battery – look for any oil or coolant stains around the valve cover, coolant reservoir, and under the vehicle, and check for soft spots in the battery case. Inspect the underbody for any signs of corrosion on the chassis or exhaust system, particularly around mounting points, as age‑related rust can develop even on lightly used trucks. A thorough road‑test that includes steady‑state cruising, gentle acceleration, and a short brake fade check will help confirm that the mechanical systems remain within safe operating limits.