2005 Ford Focus 1.6L Petrol · CA05 ABK

A pattern of intermittent failures defines the recent MOT history for this Ford Focus, with the vehicle failing its most recent test on 18 September 2025. The record shows a recurring cycle of failures and passes in 2023, 2024, and 2025, suggesting an inconsistent level of roadworthiness rather than a stable mechanical state. While the vehicle achieved a clean pass in September 2024, the subsequent failure in late 2025 indicates that mechanical issues are surfacing periodically, preventing a consistent streak of compliance. The recorded mileage of 120,020 miles over a 21-year lifespan equates to an average annual accumulation of approximately 5,715 miles. This represents a low-mileage usage profile for a vehicle of this age. While lower total mileage can reduce wear on high-friction components like engine internals and gearboxes, such infrequent use can also lead to the degradation of rubber components, such as suspension bushes and seals, due to lack of regular movement and environmental exposure. Because the DVSA records for this vehicle do not specify the exact nature of the failures or any recorded advisories, a prospective buyer must conduct a rigorous physical inspection to identify the cause of these recurring test failures. The absence of recorded defects on the failure certificates suggests that the issues may be related to components that are checked during the test but were not explicitly detailed in the digital summary provided. You should pay close attention to the underside of the vehicle for signs of structural corrosion on the subframe or exhaust system, as well as the condition of the brake pipes and fuel lines. During a test drive, it is essential to listen for any irregular knocks or clunks when traversing uneven surfaces, which could indicate worn suspension linkages or shock absorbers. You should also monitor the brake pedal for any sponginess or vibration, and check for any steering pull or wandering that might suggest issues with the steering rack or wheel alignment. Given the intermittent failure history, verifying the integrity of the braking system and the condition of all rubber bushings is a priority to ensure the vehicle meets current safety standards.