2011 Honda WW 125 EX2-A 0.1L Petrol · EA11 ABN

The latest MOT test conducted on 24 November 2025 resulted in a pass with no defects recorded. An evaluation of the vehicle's history since 2022 indicates a stable and positive maintenance trend. The only recorded advisories occurred in February 2022, concerning front brake pads nearing their minimum limit and a nail in the rear tyre. Given that all subsequent tests have been clean, it is reasonable to conclude that these items were addressed and that the vehicle has been consistently maintained to a high standard. The recorded mileage of 40,759 miles over approximately fifteen years represents a low annual average of roughly 2,717 miles. While this suggests that the engine and drivetrain have experienced less mechanical wear than a typical high-mileage example, such low usage often implies periods of prolonged standing. This usage profile shifts the primary mechanical concern from wear-and-tear to age-related degradation, where components may fail due to inactivity or chemical breakdown rather than physical use. Due to the clean MOT record and low mileage, the prospective buyer should prioritise a physical inspection of age-sensitive components. It is critical to examine the tyre sidewalls for signs of perishing or weather-checking, as rubber compounds harden and crack over time regardless of the remaining tread depth. The buyer should also check the brake discs for surface corrosion and ensure there are no binding calipers, which can occur when a vehicle is left stationary for extended periods. The health of the 12V battery should be verified, as infrequent charging cycles often lead to premature capacity loss. Furthermore, the buyer must verify that the service history reflects calendar-based maintenance rather than solely mileage-based intervals. Engine oil, brake fluid, and coolant degrade chemically over time, and failure to replace these fluids can lead to internal corrosion or reduced braking efficiency. During the test drive, the buyer should listen for any stiffness or clunks from the suspension bushes and ensure the drivetrain operates smoothly without hesitation. Finally, a thorough inspection of the frame and exposed metalwork for corrosion is advised, particularly if the vehicle has been stored in a damp environment.