2016 VAUXHALL MOKKA1.4L Petrol

The Vauxhall Mokka’s most recent MOT tests—conducted just five months ago on 2025-12-29—show an unusual but technically stable pattern: two consecutive passes and fails at the same mileage (71,635), with no defects or advisories recorded. While the lack of reported issues suggests the vehicle cleared all mandatory checks, the duplicate test dates imply either a retest after an administrative error or a brief period of uncertainty before final clearance. No advisories in any test indicate the tester did not flag any components for imminent failure, though the absence of defects does not preclude underlying wear. The most recent pass confirms the car remains roadworthy under current MOT standards, but the irregular retest warrants scrutiny of whether previous owners addressed any unrecorded concerns. Mileage progression suggests moderate usage, averaging around 7,160 miles annually—a rate consistent with typical light-to-moderate driving. The gap between the 2023 and 2024 tests (9,888 miles in 11 months) is slightly higher than the subsequent intervals, but no extreme spikes or prolonged inactivity are evident. The 2025 tests occurred at identical mileage, which is unusual unless the vehicle was stationary or driven minimally between tests. This pattern could imply either infrequent long-distance travel or a period of reduced usage, though it does not directly correlate with mechanical wear beyond standard expectations for a vehicle of this age. Given the absence of recorded defects or advisories, the primary focus for an in-person inspection should centre on components that commonly fail without MOT-triggering symptoms. The suspension—particularly rear bushes and coil springs—should be checked for excessive play or corrosion, as these often degrade gradually without immediate failure. Brake systems, including rear calipers and discs, warrant inspection for binding or uneven wear, especially if the vehicle has been stationary for extended periods. Structural integrity, particularly around wheel arches and sills, should be examined for corrosion, as this model is prone to rust progression in wet conditions. Finally, the exhaust system’s integrity should be verified, as catalytic converter or manifold failures can occur without MOT detection if emissions remain within limits. Tyres, despite no MOT failures, should be assessed for uneven tread wear or embedded debris, which could indicate alignment or suspension issues.