HONDA CBR1100XX2003 · 1.1L PETROL

The 2003 Honda CBR1100XX presents a stable and improving maintenance trend, culminating in a clean pass on 25 February 2026 at 49,113 miles with zero defects recorded. That result is the most recent MOT entry, sitting just under four months before today's date of 18 June 2026, so the certificate is still valid and the bike's current roadworthiness status is strong. The trajectory from the 2022 failure through to the 2026 pass shows a clear resolution of the faults that previously caused a fail, indicating the previous owner addressed those issues rather than ignoring them. The mileage pattern tells a story of very light use. Between the June 2021 test at 47,914 miles and the June 2023 test at 48,324 miles, the bike covered only 410 miles across two full years. The 2022 failure at 48,315 miles sits within that same narrow window, suggesting the bike was barely ridden during that period. From June 2023 to February 2026, the odometer moved just 789 miles over nearly three years. At roughly 2,135 miles per year across its 23-year life, this is exceptionally low. Such sparse use raises its own concerns: long periods of standing can cause seal deterioration, fuel system issues, and localised corrosion that low-mileage figures alone do not reveal. The 2022 failure is the most informative entry in the record. A missing rear reflector, a seriously leaking offside front shock absorber, and an excessively binding front brake caliper point to neglect during that dormant phase. The shock absorber fluid leak in particular is a significant defect, as it directly compromises damping performance and front-end stability. The binding caliper would have caused uneven brake disc wear, overheating, and increased fuel consumption. Both faults were rectified before the June 2023 pass, but a prospective buyer should still inspect the front suspension closely. Check the fork seals for any residual weeping, verify the fork stiction by compressing the front end, and examine the front brake disc for scoring or blueing from the period of binding. Beyond the flagged items, the age of the machine demands attention to structural integrity regardless of mileage. Inspect the frame welds, particularly around the headstock and swingarm pivot, for any signs of corrosion or cracking. Rubber components such as suspension bushes, gaiters, and fuel hoses deteriorate with age as much as with use, so their condition should not be assumed good simply because the odometer reads low. The clean 2026 result is encouraging, but a physical inspection remains essential for a machine that has spent long periods stationary.