2026 AUDI Q3 EDITION 1 E-HYBRID S-A1.5L Hybrid Electric (Clean)

This Audi Q3 e-hybrid has demonstrated a stable roadworthiness profile since its most recent MOT test on 3 March 2026, where it passed without any recorded defects. The failure on the preceding day—also at just 19,899 miles—was unusual, as no faults were logged, suggesting either a rare administrative anomaly or a temporary system error rather than a recurring mechanical issue. Given the vehicle’s age (less than five months old at the time of the latest test), there is no established pattern of wear or failure to assess. The absence of advisories or repeated failures on critical systems like the hybrid battery, suspension, or braking indicates no obvious neglect or pre-existing conditions. The recorded mileage of 19,901 miles at the latest test reflects minimal usage, with only two miles accumulated between the failure and pass. This suggests the vehicle has either been stored or driven very sparingly since its registration. The lack of intermediate mileage readings or earlier tests makes it impossible to determine long-term maintenance habits, but the recent history shows no signs of forced or excessive wear. For a vehicle of this age, the mileage is unusually low, which could imply either a new owner with cautious driving habits or a vehicle that has not yet been fully integrated into regular use. Given the sparse MOT history, a buyer should prioritise a thorough inspection of the hybrid system, particularly the high-voltage battery connections and cooling system, as these are common failure points in early e-hybrid models. The suspension components—including coil springs, bushes, and dampers—should be checked for early wear, especially if the vehicle has been stationary for extended periods, as this can accelerate deterioration. Brake discs and pads, while not yet likely to require replacement, should be examined for uneven wear or binding, particularly if the vehicle has been driven inconsistently. Structural integrity, including underbody corrosion and wheel bearing condition, should also be verified, as these are often overlooked in very low-mileage vehicles. The testers did not flag any issues, but visual confirmation of these areas is essential given the limited data available.