2019 Audi A6 S Line 40 TDI S-A 2.0L Diesel · HSZ 6061

The vehicle presents a clean roadworthiness profile based on the most recent certification. In the MOT test conducted on November 2024 at 51,025 miles, the Audi passed with no recorded defects or advisories. This result indicates a stable maintenance trend where the primary safety and mechanical components met all DVSA minimum standards at the time of the last inspection. With a recorded mileage of 51,025 miles over seven years, the car has averaged approximately 7,289 miles per year. This usage pattern is consistent with low-to-moderate driving, which generally results in less wear on drivetrain components and suspension assemblies compared to high-mileage counterparts. The lack of recorded faults in the 2024 test suggests that the vehicle has not been subjected to harsh environments or neglect that would typically trigger immediate mechanical failures. Since the MOT history is sparse and clean, a buyer should focus on a physical inspection of components that are not fully tested during a standard MOT. Check the condition of the suspension bushes and coil springs for signs of perish or fatigue, as low-mileage vehicles can suffer from rubber degradation over time. Examine the brake discs for uneven wear or pitting and verify that the calipers are not binding, as these issues can sometimes manifest between tests if the vehicle sits for extended periods. Inspect the structural integrity of the chassis for corrosion to ensure no hidden rust is developing despite the clean record. Given the low mileage, verify the service history to confirm that oil changes and fluid replacements were performed according to time intervals rather than just mileage. The current data suggests a well-maintained example, but a hands-on check of tyres and fluid levels remains necessary to confirm the vehicle's current mechanical health.