VAUXHALL VIVARO2013 · 2.0L DIESEL

The vehicle presents a concerning maintenance trend characterized by reactive rather than proactive repairs. While the Vauxhall passed its most recent MOT test on 24 April 2026 at 113,124 miles, this followed just three days after a significant failure involving multiple faults. The record shows a recurring pattern of mechanical neglect, particularly regarding the suspension and braking systems. The persistence of faults across multiple testing years suggests that the owner only addresses defects when forced to by an MOT failure, rather than performing scheduled inspections or preventative maintenance. At 113,124 miles over 13 years, the Vivaro averages approximately 8,700 miles per year, which is consistent with typical commercial use for this age group. However, the mileage accumulation between tests is steady, with roughly 5,500 miles covered between April 2025 and April 2026. This consistent usage indicates the vehicle is used regularly, which explains the accelerated wear on rubber components like the ball joints, steering bushings, and de-laminated tyres noted in the inspection history. A buyer must conduct a thorough physical inspection of the front suspension and steering assembly. The tester consistently flagged play in the steering rack inner joints and the nearside front lower suspension arm ball joint in April 2026. Furthermore, the corrosion noted on both rear coil springs in the same test is a structural risk that could lead to component failure if the rust has compromised the metal. The braking system also shows signs of instability, with binding calipers reported on the nearside rear and a leaking offside rear hydraulic caliper identified during the failed April 2026 test. Engine health requires close attention due to the April 2026 failure for an inoperative Malfunction Indicator Lamp and excessive exhaust emissions. These issues often mask underlying sensor faults or combustion problems that may not have been fully rectified despite the pass. The recurring front fluid leak mentioned in the most recent test, while not deemed excessive at the time, indicates an ongoing seal or gasket failure that will require constant monitoring. Given the history of incorrectly mounted brake pads and worn components, a comprehensive mechanical pre-purchase inspection is essential to ensure no hidden safety defects remain.