2018 HYUNDAI TUCSON1.6L Petrol

This Hyundai Tucson has maintained a consistent MOT history with no defects recorded across five consecutive tests, all passing without fail. The most recent inspection on 2025-10-20—just nine months ago—confirms the vehicle remains roadworthy under current DVSA standards. While the absence of advisories or failings suggests no recurring mechanical issues, the lack of any recorded defects does not preclude hidden wear or deferred maintenance. The vehicle’s compliance with emissions and structural checks at each test implies no obvious corrosion in critical load-bearing areas or drivetrain failures, though visual confirmation of underbody and chassis conditions is essential. The recorded mileage of 58,281 miles over eight years reflects an average of approximately 7,285 miles annually, which is typical for a vehicle of this age. There are no unusually large gaps between tests—each MOT was conducted within the standard 12-month window, and mileage increments are steady without abrupt spikes or prolonged periods of inactivity. The most significant jump between tests occurred between 2023-03-01 (34,859 miles) and 2024-02-26 (44,897 miles), covering 10,038 miles in just over a year, which remains within reasonable usage patterns. The consistency in mileage suggests the vehicle has not been subjected to extreme or irregular driving conditions that might accelerate wear. Given the clean MOT record, the primary focus for an in-person inspection should centre on components prone to wear at this mileage. The suspension—particularly coil springs, bushes, and shock absorbers—should be examined for uneven sagging, excessive play, or fluid leaks, as these are common failure points in vehicles of this age. Brake discs and pads, while not explicitly flagged, warrant scrutiny for uneven wear, glazing, or binding calipers, especially if the vehicle has experienced rapid mileage accumulation. Tyres, though not recorded as failing, should be checked for uneven tread depth, sidewall damage, or signs of improper inflation, which could indicate past neglect. Finally, underbody inspection for corrosion—particularly around wheel arches, sills, and exhaust components—is critical, as structural integrity is not confirmed by the MOT alone. The absence of advisories in previous tests does not guarantee current hidden issues, so thorough visual and functional checks are advised.