2022 Indian Motorcycle Chief Bobber Dark Horse 1.9L Petrol · LV22 ULZ

The latest MOT test conducted on 06 June 2026 resulted in a pass with no defects recorded. The inspection history from 2025 and 2026 demonstrates a stable and consistent maintenance trend, with both tests returning clean results. While this indicates the vehicle meets the necessary regulatory standards, the absence of advisories is consistent with the extremely low operational demand placed upon the machine during this period. The recorded mileage of 918 miles for a four-year-old vehicle is remarkably low, representing an annual usage rate of approximately 230 miles. While this implies very little mechanical wear on the engine, transmission, and drivetrain, such infrequent use carries its own set of risks. Low-mileage vehicles that spend extended periods stationary are prone to different types of degradation than high-mileage counterparts, specifically regarding the chemical stability of fluids and the physical integrity of components that rely on regular movement to remain lubricated and functional. As the MOT record is clean and the mileage is minimal, your physical inspection should prioritise age-related and storage-related issues over component wear. Closely examine the tyres for sidewall cracking or perishing, as rubber compounds can degrade and harden over time even if the tread remains deep. Check the brake discs for surface corrosion and ensure the calipers are not binding due to the pistons sticking from inactivity. It is also vital to inspect the suspension for any signs of seal weeping on the forks, which can occur when seals dry out from lack of regular lubrication. Finally, verify that the service history reflects time-based maintenance rather than just mileage intervals. Fluids such as engine oil, brake fluid, and coolant can degrade chemically over several years regardless of distance travelled. You should also check the battery health and ensure it has been stored correctly, as long periods of standing can lead to sulphation and a reduced capacity to hold a charge. Confirm that the fuel system has been well-maintained to prevent the issues associated with stale fuel, and check all fasteners and exposed metal for signs of surface corrosion caused by environmental exposure during storage.