2022 Cupra Born V1 EV Electric · R12 JBS

A single tyre advisory is the only blemish on an otherwise spotless MOT record for this 2022 Cupra Born V1 EV, which passed its most recent test on 1 May 2026 with no failures recorded. The advisory notes that the nearside rear tyre is worn close to the legal limit and shows edge wear, while the earlier test in April 2025 was completely clear. This pattern suggests that the vehicle’s overall roadworthiness has remained stable, with the only emerging concern being tyre wear on one corner. With 18,294 miles logged over roughly four years, the annual average sits at about 4,600 miles – considerably below the typical UK usage rate for a family hatchback. Such low mileage generally means reduced cumulative stress on suspension components, brake pads and rotors, and the electric drivetrain, but it can also indicate periods of limited use or storage. Light use does not automatically guarantee component longevity; tyres, for example, can develop flat‑spotting or dry‑rot if the car sits for extended periods, and battery cooling cycles may be less frequent. When inspecting the car, give particular attention to the nearside rear tyre. Verify tread depth with a simple gauge or the penny test, looking for any areas below 1.6 mm, and examine the sidewall for cracks, bulges or exposed cords. During a short drive, feel for vibration or a wobble that may indicate uneven wear, and note any pulling to the left or right, which could point to tyre imbalance or a developing suspension issue. Compare the condition of the remaining three tyres; mismatched wear patterns may reveal alignment or camber problems that have not yet triggered an MOT advisory. Beyond the tyre, a brief functional check of the braking system is prudent: ensure the pedal feels firm, listen for any squeal or grinding on initial application, and watch for any pulsation through the pedal that could hint at disc wear. A quick steering test—checking for excessive play, binding or a noticeable pull when the wheel is released—will confirm that the steering rack and suspension bushes remain in good order. Given the vehicle’s electric powertrain, a professional EV health scan can verify battery state of charge and high‑voltage system integrity, completing a comprehensive assessment before purchase.