1998 Bentley Continental R 6.8L Petrol · S639 NRN
1998 Bentley Continental R (6.8L, petrol). First registered 01 Aug 1998. Recorded mileage 51,901 miles. MOT valid until 30 Aug 2027.
- Make & Model
- BENTLEY CONTINENTAL R
- Year / Origin
- 1998 · Glasgow
- Safety Recall
- Unknown
- MOT Status
- Valid until 30 Aug 2027
- Road Tax
- —
- Recorded Mileage
- 51,901 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 6.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
S639 NRN Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 01/09/2026
- 51,901 miles recorded at latest MOT
- 2 historical MOT failures
- No defects recorded at the latest MOT
- Recurring brakes items (7 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
S639 NRN MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1998 Bentley Continental R (S639 NRN) between August 2024 and September 2026.
The record contains 3 passes and 2 failures.
The most recent test on 01 September 2026 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (7 issues), Lighting (3 issues), Tyres (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 6 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Offside Front Electrical wiring for braking components extremely deteriorated brake pad wear sensor cable damaged expos”; “Offside Front Electrical wiring connectors for braking disconnected brake pad wear sensor wire (4.11 (a) (iii))”; “Offside Front Electrical wiring likely to touch hot or rotating parts brake pad wear sensor wire (4.11 (a) (iii))”.
S639 NRN Mileage History
- 30/08/202441,549 mi
- 30/08/202441,549 mi
- 05/08/202546,972 mi+5,423 mi
- 08/08/202547,055 mi+83 mi
- 01/09/202651,901 mi+4,846 mi
Average of roughly 5,165 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Bentley Bentley Continental R
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: BENTLEY CONTINENTAL R
Known issues reported by owners and MOT testers.
- Sills, Wheelarches and Subframe Corrosion(Serious)
Despite hand-crafted assembly at Crewe, the heavy steel unitary bodyshell of the Continental R is highly vulnerable to moisture and road salt entrapment along the lower outer and inner sills, rear wheelarch lips, and front bulkhead seams. Water often collects behind plastic wheelarch liners and windscreen scuttle drains, rotting hidden structural mounting points that can result in MOT structural failure and tens of thousands of pounds in specialist coachbuilding repairs.
- Zytek Engine Management Sensor and Harness Degradation(Serious)
Post-1995 Continental R models (featuring the 385–420 bhp turbocharged V8) rely on a proprietary Zytek electronic engine management system. As underbonnet heat accumulates in this tight engine bay, the engine bay wiring harness insulation becomes brittle, and critical proprietary sensors—including crank position sensors, air mass sensors, and charge temperature senders—suffer heat soak failure. Sourcing and recalibrating proprietary Zytek ECUs and sensors now requires specialist electronic reconditioning.
- Hydraulic Braking System and Rear Gas Sphere Failure(Serious)
The Continental R relies on the complex Bentley twin-circuit hydraulic system operating at over 2,000 psi to power the brakes and self-levelling rear suspension. Rubber diaphragms inside the hydraulic accumulator spheres perish with age, causing the system to lose hydraulic buffering capacity. This results in heavy brake pedal resistance, hydraulic pump chatter, and rock-hard rear damping that transmits road shock directly into the coachbuilt chassis.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
BENTLEY CONTINENTAL R Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1998 model year cars.
- Sills, Wheelarches and Subframe CorrosionSerious
Despite hand-crafted assembly at Crewe, the heavy steel unitary bodyshell of the Continental R is highly vulnerable to moisture and road salt entrapment along the lower outer and inner sills, rear wheelarch lips, and front bulkhead seams. Water often collects behind plastic wheelarch liners and windscreen scuttle drains, rotting hidden structural mounting points that can result in MOT structural failure and tens of thousands of pounds in specialist coachbuilding repairs.
- Zytek Engine Management Sensor and Harness DegradationSerious
Post-1995 Continental R models (featuring the 385–420 bhp turbocharged V8) rely on a proprietary Zytek electronic engine management system. As underbonnet heat accumulates in this tight engine bay, the engine bay wiring harness insulation becomes brittle, and critical proprietary sensors—including crank position sensors, air mass sensors, and charge temperature senders—suffer heat soak failure. Sourcing and recalibrating proprietary Zytek ECUs and sensors now requires specialist electronic reconditioning.
- Hydraulic Braking System and Rear Gas Sphere FailureSerious
The Continental R relies on the complex Bentley twin-circuit hydraulic system operating at over 2,000 psi to power the brakes and self-levelling rear suspension. Rubber diaphragms inside the hydraulic accumulator spheres perish with age, causing the system to lose hydraulic buffering capacity. This results in heavy brake pedal resistance, hydraulic pump chatter, and rock-hard rear damping that transmits road shock directly into the coachbuilt chassis.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.