2014 BMW 4202.0L DIESEL

The vehicle remains roadworthy, but the maintenance trend shows a concerning pattern of reactive rather than proactive upkeep. While the test in May 2026 at 135,505 miles resulted in a pass, the tester flagged three tyres worn to the legal limit and a structural cut on the offside rear tyre. This mirrors a failure from March 2023 where the front tyres were also worn out, suggesting that the owner frequently delays replacing consumables until they fail an inspection. The mileage accumulation is consistent with a 12-year-old vehicle, averaging approximately 11,300 miles per year. Between March 2024 at 111,097 miles and March 2025 at 122,685 miles, the car covered roughly 11,600 miles, followed by another 12,800 miles leading up to the 2026 test. This steady usage pattern indicates the car is driven regularly, which generally helps prevent component seizing but puts consistent strain on mechanical and rubber components. A buyer must specifically inspect the offside rear suspension mounting area, as the 2024 test identified corrosion in this section. Although the tester deemed it not excessive at the time, corrosion on BMW suspension components can accelerate if not monitored, potentially leading to structural integrity issues. The broken headlamp levelling linkage noted in 2025 also indicates that secondary mechanical faults are overlooked by the current keeper until they cause an outright MOT failure. Given the recurring issues with uneven tyre wear, a thorough wheel alignment and suspension geometry check is essential. The edge wear often points to worn bushes or incorrect camber settings. The prospective buyer should also verify the condition of all four tyres immediately, as the history shows a history of sidewall damage and tread depth depletion across multiple years.