2011 Citroen DS3 1.6L Petrol · XX07 ADG

The vehicle presents a stable roadworthiness profile following its most recent MOT pass on 22 January 2026 at 91,055 miles, which recorded no defects. While the car has experienced several failures in previous years, the maintenance trend appears to be improving. The tester cleared the vehicle of all previous issues, including a failed test in January 2025 where an offside front suspension arm ball joint was found to be excessively worn. The absence of advisories in the last two consecutive tests suggests that the owner is now addressing mechanical faults promptly to maintain compliance. The mileage history indicates a consistent and relatively low usage pattern for a 2011 vehicle, averaging approximately 6,000 miles per year. The record shows steady progression from 46,936 miles in September 2017 to the current 91,055 miles. There are no significant gaps in testing or evidence of long periods of inactivity. The incremental increases between tests, such as the 4,909 miles covered between the January 2025 and January 2026 inspections, suggest regular, predictable driving rather than sporadic or heavy commercial use. A prospective buyer should focus their physical inspection on the front suspension and steering components. The MOT history shows a recurring pattern of issues with track rod ends and ball joints, specifically noted in 2019, 2021, and 2022. Although these were passed in subsequent tests, the frequency of these faults suggests the front end undergoes significant wear. The tester also flagged multiple CV boot failures and exhaust leaks in the past, so a close examination of the drive shafts and the exhaust system integrity is necessary to ensure these components have been adequately replaced rather than merely patched. Brake maintenance also warrants attention. The December 2021 test highlighted pitted and scored discs on both the front and rear axles, alongside an imbalance across the axle. While the 2026 record is clean, the history of worn tyres and brake disc deterioration implies that consumable components may be nearing the end of their service life if not recently refreshed. Checking the thickness of the brake discs and the condition of the suspension bushes will provide the best indication of the vehicle's current mechanical state.