2016 Skyteam Unknown 0.1L Petrol · YN16 AHF

The vehicle’s most recent MOT test on 2026-01-16 at just 2,840 miles confirms it remains roadworthy, with no defects recorded across five consecutive passes since 2021. This consistency suggests no recurring mechanical failures, though the absence of advisories or defects does not preclude underlying issues—particularly given the vehicle’s unusually low mileage. The most recent test occurred only six months ago, which is well within the DVSA’s recommended interval for minimal wear, though the extended gaps between tests (up to 15 months) warrant scrutiny of long-term neglect risks. The recorded mileage of 2,840 miles over nearly ten years—an average of approximately 284 miles annually—is exceptionally low for a vehicle of this age. This pattern, evident from the stable mileage figures between tests (5,134 miles in 2021 to 5,192 miles in 2023), implies prolonged periods of inactivity, which accelerates degradation of fluids, seals, and elastomeric components like suspension bushes and wiper blades. The lack of mileage progression between tests also raises questions about whether the vehicle was regularly driven or stored, potentially exposing it to moisture-related corrosion or battery discharge. Given the low mileage and extended test intervals, a buyer should prioritise inspecting components typically affected by stagnation or prolonged storage. Focus on the battery condition—check for corrosion at terminals and test voltage—and examine the suspension for dried or degraded bushes, particularly at the rear. The brake system, while never flagged, should be assessed for binding calipers or seized wheel cylinders, as standing vehicles are prone to rust-induced brake failure. Additionally, inspect the underbody for corrosion, especially around wheel arches and sills, as prolonged immobility exacerbates moisture retention. Tyre tread depth remains unrecorded in defects, but the low mileage suggests they may still be serviceable, though their age (nearing ten years) demands visual inspection for cracking or separation.