1996 Lamborghini Diablo 5.7L Petrol · 20 TJ
1996 Lamborghini Diablo (5.7L, petrol). First registered 09 Aug 1996. Recorded mileage 19,549 km. MOT valid until 27 Sept 2027.
- Make & Model
- LAMBORGHINI DIABLO
- Year / Origin
- 1996
- Safety Recall
- Unknown
- MOT Status
- Valid until 27 Sept 2027
- Road Tax
- —
- Recorded Odometer
- 19,549 km
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 5.7L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
20 TJ Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 29/09/2026
- 19,549 km recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
20 TJ MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1996 Lamborghini Diablo (20 TJ) between September 2022 and September 2026.
The record contains 5 passes and 0 failures.
No failures or advisories appear anywhere in the recorded tests, so the documented MOT record is relatively clean.
20 TJ Odometer History
- 22/09/202219,023 km
- 18/09/202319,303 km+280 km
- 20/09/202419,416 km+113 km
- 25/09/202519,549 km+133 km
- 29/09/202619,549 km
Average of roughly 131 km per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Lamborghini Lamborghini Diablo
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Good
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: LAMBORGHINI DIABLO
Known issues reported by owners and MOT testers.
- Single-Plate Clutch Wear and Slave Cylinder Pull-Rod Failure(Serious)
The Diablo's 5.7-litre and 6.0-litre V12 engines transfer up to 457 lb-ft of torque through a single dry-plate clutch. Due to high vehicle mass and heavy low-speed gearing, the clutch disc experiences rapid friction material wear during stop-start UK driving, rarely lasting beyond 20,000 to 25,000 miles. Furthermore, pre-1998 cars employ a pull-type hydraulic slave cylinder mechanism where the internal operating rod is prone to fatigue fractures or hydraulic seal blow-out, suddenly leaving the driver unable to disengage the clutch. Replacing the clutch assembly requires dropping the rear suspension, differential, and V12 powertrain, resulting in substantial specialist labour bills.
- Timing Chain Hydraulic Tensioner Failure and Overrun Rattle(Serious)
Early 1990–1994 Lamborghini Diablo 5.7-litre V12 engines used oil-pressure-fed hydraulic timing chain tensioners that suffered from a dangerous design flaw: engine oil pressure pulsations progressively ratcheted the tensioners tighter against the guide rails until excessive tension caused one or both timing chains to snap. This catastrophic failure resulted in complete valve-to-piston collision, destroying cylinder heads, pistons, and liners. From 1994, Lamborghini superseded these with mechanical ratchet tensioners and issued service bulletins to retrofit earlier engines. In addition, high-mileage Diablos can experience timing chain stretch, producing an audible rattle on the overrun.
- Galvanic Body Corrosion and Steel Spaceframe Rust(Moderate)
The Diablo construction combines hand-beaten aluminium body panels mounted over a rectangular-tube steel spaceframe, with composite carbon-fibre used for the bumpers, sills, front bonnet, and engine cover. Inadequate galvanic barrier protection at the factory allows electrolytic corrosion to occur where the aluminium skin makes direct contact with the steel subframes. When exposed to damp British roads and winter salt spray, moisture is trapped within unsealed seams, causing galvanic blistering of the aluminium paintwork and structural rusting of the tubular steel chassis. Areas worst affected include the lower door bottoms, outer sill mounting points, front boot floor, and fuel filler pocket.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (20T Series)
Vehicles registered in the same regional DVLA batch as 20TJ.
LAND ROVER
RANGE ROVER AUTOBIO D MHEV A
MINI
MINI
MERCEDES-BENZ
C
TOYOTA
GR86 D-4S
FERRARI
F8 SPIDER S-A
ROLLS ROYCE
WRAITH
MERCEDES-BENZ
VITO
CUPRA
ATECA VZ2 TSI 4DRIVE S-A
VOLKSWAGEN
GOLF R BLACK ED TSI 4MOTION SA
JAGUAR
XF
LAND ROVER
DEFENDER XDYNAMIC HSE D MHEV A
LAND ROVER
RANGE ROVER SPORT
LAMBORGHINI DIABLO Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1996 model year cars.
- Single-Plate Clutch Wear and Slave Cylinder Pull-Rod FailureSerious
The Diablo's 5.7-litre and 6.0-litre V12 engines transfer up to 457 lb-ft of torque through a single dry-plate clutch. Due to high vehicle mass and heavy low-speed gearing, the clutch disc experiences rapid friction material wear during stop-start UK driving, rarely lasting beyond 20,000 to 25,000 miles. Furthermore, pre-1998 cars employ a pull-type hydraulic slave cylinder mechanism where the internal operating rod is prone to fatigue fractures or hydraulic seal blow-out, suddenly leaving the driver unable to disengage the clutch. Replacing the clutch assembly requires dropping the rear suspension, differential, and V12 powertrain, resulting in substantial specialist labour bills.
- Timing Chain Hydraulic Tensioner Failure and Overrun RattleSerious
Early 1990–1994 Lamborghini Diablo 5.7-litre V12 engines used oil-pressure-fed hydraulic timing chain tensioners that suffered from a dangerous design flaw: engine oil pressure pulsations progressively ratcheted the tensioners tighter against the guide rails until excessive tension caused one or both timing chains to snap. This catastrophic failure resulted in complete valve-to-piston collision, destroying cylinder heads, pistons, and liners. From 1994, Lamborghini superseded these with mechanical ratchet tensioners and issued service bulletins to retrofit earlier engines. In addition, high-mileage Diablos can experience timing chain stretch, producing an audible rattle on the overrun.
- Galvanic Body Corrosion and Steel Spaceframe RustModerate
The Diablo construction combines hand-beaten aluminium body panels mounted over a rectangular-tube steel spaceframe, with composite carbon-fibre used for the bumpers, sills, front bonnet, and engine cover. Inadequate galvanic barrier protection at the factory allows electrolytic corrosion to occur where the aluminium skin makes direct contact with the steel subframes. When exposed to damp British roads and winter salt spray, moisture is trapped within unsealed seams, causing galvanic blistering of the aluminium paintwork and structural rusting of the tubular steel chassis. Areas worst affected include the lower door bottoms, outer sill mounting points, front boot floor, and fuel filler pocket.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.