2016 Mercedes-Benz GT 4.0L Petrol · 39 MAC

A pattern of intermittent component wear has emerged in the recent testing history, despite the vehicle passing its most recent MOT on 17 August 2026 without any recorded defects. While the 2025 and 2026 inspections returned clean results, the 2024 record shows a concentration of advisories concerning the braking system and tyre integrity. This indicates a period where consumable components reached the end of their service life, though the subsequent clean tests suggest these items were addressed. The vehicle's usage profile is characterised by significantly low annual mileage, averaging approximately 3,445 miles per year over its ten-year lifespan. With a total recorded distance of 34,449 miles, the vehicle has been driven far less than the typical UK average. Mechanically, this low frequency of use can mean less cumulative wear on drivetrain components and suspension linkages, but it also increases the likelihood of components such as tyres and brakes being subject to age-related degradation or flat-spotting rather than purely mileage-based wear. Prospective buyers should pay close attention to the braking system, given the 2024 advisories regarding thin front brake pads and worn front and rear brake discs. During a test drive, it is essential to check for any pedal judder or pulsations when applying the brakes at speed, which could indicate disc thickness variations or surface irregularities. Additionally, listen for any squealing or grinding noises during low-speed braking, which may signal that the pads have not been replaced with sufficient remaining material or that calipers are not operating smoothly. Tyre condition also warrants a physical inspection, following the 2023 and 2024 advisories for edge wear and cuts to the nearside and offside front tyres. Examine the sidewalls for any signs of bulging or cracking and check the tread depth across the entire width of the tyre to ensure even wear. Any unevenness in the tread pattern could point to underlying issues with wheel alignment or suspension geometry that should be investigated before purchase.