1993 Jaguar XJS 4.0L Petrol · 777 VTE
1993 Jaguar XJS (4.0L, petrol). First registered 25 Jun 1993. Recorded mileage 114,693 miles. MOT valid until 02 Jun 2027.
- Make & Model
- JAGUAR XJS
- Year / Origin
- 1993
- Safety Recall
- Unknown
- MOT Status
- Valid until 02 Jun 2027
- Road Tax
- —
- Recorded Mileage
- 114,693 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 4.0L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
777 VTE Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 14/05/2026
- 114,693 miles recorded at latest MOT
- 2 defects noted at the latest MOT
- Recurring tyres items (6 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
777 VTE MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1993 Jaguar Xjs (777 VTE) between April 2022 and May 2026.
The record contains 5 passes and 0 failures.
The record shows no MOT failures, although 8 advisory notices note items to monitor.
Across all tests, the most frequently flagged areas are: Tyres (6 issues), Lighting (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 8 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
777 VTE Mileage History
- 05/04/2022107,680 mi
- 18/05/2023109,434 mi+1,754 mi
- 30/04/2024110,813 mi+1,379 mi
- 04/06/2025113,554 mi+2,741 mi
- 14/05/2026114,693 mi+1,139 mi
Average of roughly 1,708 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Jaguar Jaguar XJS
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Good
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: JAGUAR XJS
Known issues reported by owners and MOT testers.
- Inboard Rear Brake Caliper Seizure and Fluid Overheating(Serious)
Until mid-1993, all XJS models utilized inboard rear disc brakes mounted directly to the differential housing within the rear suspension subframe. Due to their close proximity to the hot differential and exhaust pipes, the brake calipers suffer from extreme heat soak, boiling brake fluid, and hardening hydraulic piston seals. Road grime and inaccessible location mean the calipers frequently seize, while differential output shaft oil leaks saturate the brake pads, causing severe brake fade, handbrake failure, and requiring a laborious complete rear subframe drop to repair.
- Marelli V12 Twin-Rotor Ignition Distributor Melt and Catalytic Fire Risk(Serious)
V12 models manufactured between 1989 and 1993 feature a Marelli digital electronic ignition system utilizing a single distributor with a two-tiered rotor arm firing each cylinder bank independently. If the rotor arm develops dielectric breakdown or the secondary coil fails, one entire 6-cylinder bank loses spark while the fuel injection continues spraying fuel. The raw unburnt petrol pours into the glowing hot catalytic converters, melting the ceramic substrate and creating an immediate, severe engine bay and underbody fire risk.
- Floorpan, Jacking Point, and Radius Arm Mount Corrosion(Serious)
The XJS bodyshell is susceptible to hidden corrosion, particularly on cars built before the 1994 introduction of full galvanization. Road spray and blocked scuttle drains trap moisture within the double-skinned floorpans, sills, and front chassis legs. The rear suspension radius arm forward mounting points on the floor are especially vulnerable; rust here weakens rear axle location, creating dangerous instability under heavy braking and cornering that results in immediate MOT failure.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (777V Series)
Vehicles registered in the same regional DVLA batch as 777VTE.
ASTON MARTIN
VANTAGE
LAND ROVER
R ROVER EVOQUE DYN SE D MHEV A
AUDI
A5 EDITION 1 TFSI S-A
MERCEDES-BENZ
GT
ROLLS ROYCE
CULLINAN V12 AUTO
ASTON MARTIN
RAPIDE
TESLA
MODEL Y PREMIUM LONG RANGE AWD
KIA
EV9 GT-LINE S AWD
PORSCHE
911 GT3 TOURING S-A
LAND ROVER
RANGE ROVER EVOQUE
VOLKSWAGEN
TRANSPORTER T32 H-LINE TDI S-A
VOLVO
V90 R-DESIGN T6 RECHARGE AWD A
JAGUAR XJS Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1993 model year cars.
- Inboard Rear Brake Caliper Seizure and Fluid OverheatingSerious
Until mid-1993, all XJS models utilized inboard rear disc brakes mounted directly to the differential housing within the rear suspension subframe. Due to their close proximity to the hot differential and exhaust pipes, the brake calipers suffer from extreme heat soak, boiling brake fluid, and hardening hydraulic piston seals. Road grime and inaccessible location mean the calipers frequently seize, while differential output shaft oil leaks saturate the brake pads, causing severe brake fade, handbrake failure, and requiring a laborious complete rear subframe drop to repair.
- Marelli V12 Twin-Rotor Ignition Distributor Melt and Catalytic Fire RiskSerious
V12 models manufactured between 1989 and 1993 feature a Marelli digital electronic ignition system utilizing a single distributor with a two-tiered rotor arm firing each cylinder bank independently. If the rotor arm develops dielectric breakdown or the secondary coil fails, one entire 6-cylinder bank loses spark while the fuel injection continues spraying fuel. The raw unburnt petrol pours into the glowing hot catalytic converters, melting the ceramic substrate and creating an immediate, severe engine bay and underbody fire risk.
- Floorpan, Jacking Point, and Radius Arm Mount CorrosionSerious
The XJS bodyshell is susceptible to hidden corrosion, particularly on cars built before the 1994 introduction of full galvanization. Road spray and blocked scuttle drains trap moisture within the double-skinned floorpans, sills, and front chassis legs. The rear suspension radius arm forward mounting points on the floor are especially vulnerable; rust here weakens rear axle location, creating dangerous instability under heavy braking and cornering that results in immediate MOT failure.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.