2010 Mercedes-Benz E 3.0L Diesel · AE10 MFU

A recent period of clean MOT results follows a history of specific component failures and tyre-related advisories. While the most recent test on 03 March 2026 showed no defects, the vehicle's record includes a dangerous failure in early 2022 regarding tyre tread depth and a major failure in January 2023 concerning an inoperative engine Malfunction Indicator Lamp. The trend since those specific failures has moved toward a series of passes with no recorded advisories or defects across the 2024, 2025, and 2026 testing cycles. The recorded mileage of 108,138 miles over approximately 16 years represents an average annual accumulation of roughly 6,759 miles. This usage pattern is relatively low for a vehicle of this age and suggests a pattern of moderate, consistent use rather than high-frequency motorway driving or long periods of total inactivity. Mechanically, this level of mileage means that while major drivetrain components may have lower cumulative wear than a high-mileage equivalent, consumables such as suspension bushes, rubber seals, and cooling system hoses are subject to age-related degradation regardless of the distance travelled. Prospective buyers should pay close attention to the previous tyre-related issues which appeared as both advisories and dangerous failures in the 2021 and 2022 tests. Although the most recent records are clear, the history of uneven tyre wear on the edges of the offside front and nearside rear suggests potential issues with wheel alignment or suspension geometry. During a test drive, listen for any rhythmic thumping or uneven road noise, and check for any pulling to one side during straight-line driving or steering instability, which could indicate worn control arm bushes or misaligned steering components. The 2023 failure regarding the engine Malfunction Indicator Lamp indicates that the vehicle has previously failed on the integrity of its electronic monitoring systems. While the vehicle has passed subsequent tests, it is prudent to verify that no warning lights illuminate on the dashboard during a cold start or under various load conditions. Ensure the engine idles smoothly and that there are no sudden fluctuations in RPM, as any lingering issues with sensor functionality or engine management could manifest as unexpected performance changes.