2014 Ford Focus 1.0L Petrol · AF64 AAJ

The latest MOT test on 17 August 2023 resulted in a pass with no recorded defects or advisories. The maintenance trend appears stable, as the vehicle has consistently met the required standards in its recent inspections. While a failure was noted in August 2022, the absence of specific defect details in the record prevents a precise analysis of that event, but the subsequent clean pass indicates that the vehicle was brought back to a compliant standard. The vehicle's mileage of 43,976 miles is exceptionally low for a 2014 model, representing an average of approximately 3,665 miles per annum. While this suggests minimal wear on the engine and transmission, such low usage can sometimes indicate that the vehicle has been subject to long periods of standing or very short trips. This type of usage profile can lead to specific mechanical issues that differ from high-mileage wear, such as the degradation of seals and the accumulation of moisture in various systems. As a prospective buyer, you should prioritize inspecting age-related wear over mileage-related wear. Closely examine the tyres for signs of perishing or sidewall cracking, as old rubber can lose its structural integrity even if the tread is deep. Check the brake discs for excessive corrosion and ensure the calipers are not binding, which can occur if the vehicle has been stationary for extended periods. During your test drive, pay close attention to the suspension for any clunks or knocks, which may indicate that the bushes or coil springs have become brittle or seized due to lack of regular movement. Furthermore, you must verify that the vehicle has adhered to a time-based service schedule rather than just a mileage-based one. Check the service book for evidence of regular oil and fluid changes, as brake fluid and coolant can become ineffective over time through chemical degradation. Inspect the 12V battery for signs of weakness and check all rubber components, including engine belts and coolant hoses, for cracking or brittleness. Ensuring that these time-sensitive maintenance items have been addressed is crucial for a vehicle with this specific usage profile.