2017 Peugeot 5008 1.6L Diesel · AK67 FWE
2017 Peugeot 5008 (1.6L, diesel). First registered 23 Nov 2017. Recorded mileage 85,803 miles. MOT valid until 07 Jul 2027.
- Make & Model
- PEUGEOT 5008
- Year / Origin
- 2017 · Peterborough
- Safety Recall
- Unknown
- MOT Status
- Valid until 07 Jul 2027
- Road Tax
- —
- Recorded Mileage
- 85,803 mi
- ULEZ Compliance
- ULEZ Compliant (Euro 6 Diesel)
- Fuel & Engine
- Diesel · 1.6L
- Reliability Guide
- Common Faults
AI-generated interpretation of this vehicle’s MOT record — not an official statement and not a substitute for an independent inspection.
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
AK67 FWE Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 09/07/2026
- 85,803 miles recorded at latest MOT
- 2 historical MOT failures
- 8 defects noted at the latest MOT
- Recurring lighting items (11 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
AK67 FWE MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 2017 Peugeot 5008 (AK67 FWE) between December 2023 and July 2026.
The record contains 3 passes and 2 failures.
The most recent test on 09 July 2026 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Lighting (11 issues), Brakes (4 issues), Tyres (3 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 17 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Nearside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))”; “Offside Front Tyre tread depth below requirements of 1.6mm edges (5.2.3 (e))”; “Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (”.
AK67 FWE Mileage History
- 28/12/202363,666 mi
- 13/06/202575,714 mi+12,048 mi
- 18/06/202575,769 mi+55 mi
- 03/07/202685,704 mi+9,935 mi
- 09/07/202685,803 mi+99 mi
Average of roughly 8,751 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot 5008 (Gen 2)
Our database tracks 6 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (AK67 Series)
Vehicles registered in the same regional DVLA batch as AK67FWE.
BMW
330
BMW
5 SERIES
BMW
420
BYD
SEAL EXCELLENCE EV AWD
BMW
5 SERIES
MINI
COUNTRYMAN
BMW
3 SERIES
BMW
420
BMW
116
BMW
1 SERIES
MINI
COOPER
BMW
318
PEUGEOT 5008 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2017 model year cars.
- 1.2 PureTech "Wet Belt" DegradationSerious
The 1.2 PureTech three-cylinder petrol engine utilises a wet timing belt running bathed in engine oil. The rubber belt degrades over time due to fuel dilution and heat cycles, shedding rubber debris into the oil sump. This debris clogs the oil pickup strainer, causing oil starvation, vacuum pump failure, and dangerous loss of brake servo assistance (Recall R/2020/331), leading to engine destruction if neglected.
- AdBlue / BlueHDi Emissions FailureSerious
On 1.5 and 2.0 BlueHDi diesel models, the selective catalytic reduction (SCR) AdBlue tank houses an integrated pump, heating element, and urea level sensor. Crystallisation of urea solution and internal circuit board failure cause delivery failure, illuminating the UREA warning lamp and initiating a non-restart countdown (commencing at 700 miles). Because the tank is a sealed unit, complete replacement of the tank assembly is required.
- 1.5 BlueHDi Camshaft Timing Chain SnappingSerious
The 1.5-litre BlueHDi (DV5R) 16-valve engine fitted from late 2017 utilizes an internal 7mm chain to connect the twin camshafts. Inadequate lubrication tolerance and high stress lead to premature chain stretch, rattling, and sudden breakage. Chain failure bends valves, shears camshaft carriers, and destroys the cylinder head. Stellantis issued a special coverage programme and upgraded replacement kit with an 8mm chain and redesigned cylinder head housing.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.