2019 Peugeot 208 1.2L Petrol · AM59 RMM

The most recent MOT test conducted on 26 March 2026 resulted in a pass with no recorded defects. Evaluating the overall maintenance trend, the vehicle appears to be in a stable condition, although the history shows a period of minor degradation in 2025. During that year, advisories were issued for thinning front brake pads and a minor exhaust gas leak. The subsequent clean MOT in 2026 suggests that these specific mechanical issues have been addressed or have not yet reached a critical threshold, indicating that the vehicle's roadworthiness is currently well-maintained. With a recorded mileage of 59,544 miles over approximately seven years, the vehicle has covered an average of roughly 8,500 miles per year. This level of usage is entirely consistent with typical domestic driving patterns for a vehicle of this age and type. This moderate mileage profile is advantageous for a prospective buyer, as it implies the vehicle has not been subjected to the heavy wear and tear associated with high-mileage commercial use, nor has it suffered the potential degradation from long periods of inactivity, such as brake binding or fluid contamination. Despite the clean 2026 result, you should remain vigilant regarding the issues flagged in previous years. During your test drive, listen closely for any rasping or ticking sounds from the engine bay or undercarriage, which could indicate that the previously noted exhaust leak has returned or worsened. Additionally, test the braking performance thoroughly; check for any shuddering through the pedal or uneven pulling to the side, which could signal that the front brake pads and discs are nearing the end of their service life or have been worn unevenly. Finally, inspect the tyres carefully for any signs of age-related perishing or sidewall cracking, as an advisory for this was noted in 2023. Even with good tread depth, older rubber can lose its grip and structural integrity due to environmental exposure. You should also verify the service history to confirm that time-sensitive maintenance, such as brake fluid changes and coolant refreshes, has been performed. A physical check of the suspension components, specifically looking for perished bushes or signs of corrosion on the coil springs, is also recommended to ensure the vehicle's handling remains precise.