2011 Vauxhall Vivaro 2.0L Diesel · AP61 MCG

The Vauxhall Vivaro has maintained a clean MOT history since its last test on 18 February 2026, passing without defects at 214,784 miles. There is no evidence of recurring faults or advisories across the past four tests, suggesting the vehicle has been consistently compliant with UK roadworthiness standards. The most recent pass confirms the absence of critical failures in brakes, suspension, exhaust emissions, or structural integrity, though this does not preclude hidden wear or deferred maintenance. Buyers should verify the current test date against the vehicle’s actual age, as the 2026 pass is now over five months old—nearing the 12-month MOT cycle threshold. The recorded mileage of 214,784 miles over 15 years indicates an average annual distance of approximately 14,300 miles, which is elevated for a vehicle of this age. This suggests frequent use, potentially accelerating wear on high-mileage components such as suspension bushes, coil springs, and brake calipers. The gap between the 2024 and 2026 tests—spanning 14 months—is unusually long, though the consecutive passes in August 2024 (one fail, one pass) imply the vehicle was brought into compliance before retesting. No advisories appear in the record, but the rapid mileage accumulation between 2022 (185,328 miles) and 2023 (194,188 miles) warrants scrutiny of fluid levels and consumable replacements. Given the lack of documented faults, priority should be given to inspecting suspension components for excessive play or corrosion, particularly at the rear where binding calipers or worn bushes could develop without warning. The brakes, though not failed, may require assessment for uneven wear or glazed discs, especially if the vehicle has been driven hard. Structural corrosion should be checked at wheel arches, sills, and underbody, as high mileage increases the risk of hidden rust compromising the chassis. The absence of emissions-related failures does not rule out catalytic converter degradation, so a smoke test or scan tool reading would be advisable. Finally, verify the service history for timing belt or chain intervals, as this model’s engine may require attention if maintenance records are incomplete.