2009 Ford Fusion 1.6L Petrol · AV09 MOU
2009 Ford Fusion (1.6L, petrol). First registered 01 Apr 2009. Recorded mileage 108,129 miles. MOT expired on 02 Sept 2026.
- Make & Model
- FORD FUSION
- Year / Origin
- 2009 · Ipswich
- Safety Recall
- Unknown
- MOT Status
- Expired on 02 Sept 2026
- Road Tax
- Untaxed (10 Jul 2026)
- Recorded Mileage
- 108,129 mi
- ULEZ Compliance
- ULEZ Compliant (Euro 4+)
- Fuel & Engine
- PETROL · 1.6L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
AV09 MOU Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 01/09/2025
- 108,129 miles recorded at latest MOT
- 1 historical MOT failure
- 6 defects noted at the latest MOT
- Recurring brakes items (8 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
AV09 MOU MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 2009 Ford Fusion (AV09 MOU) between September 2022 and September 2025.
The record contains 4 passes and 1 failure.
The most recent test on 01 September 2025 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (8 issues), Tyres (5 issues), Suspension (5 issues), Exhaust & Emissions (1 issue), Steering (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 23 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural st”; “Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the”; “Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (”.
AV09 MOU Mileage History
- 01/09/202294,528 mi
- 31/08/202399,137 mi+4,609 mi
- 19/08/2024103,407 mi+4,270 mi
- 01/09/2025108,115 mi+4,708 mi
- 01/09/2025108,129 mi+14 mi
Average of roughly 4,532 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Ford Ford Fusion (Europe)
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: FORD FUSION
Known issues reported by owners and MOT testers.
- Pollen Filter Housing Bulkhead Water Ingress(Moderate)
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer Leak(Moderate)
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator Fault(Serious)
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
FORD FUSION Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2009 model year cars.
- Pollen Filter Housing Bulkhead Water IngressModerate
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer LeakModerate
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator FaultSerious
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.