2023 Land Rover Range Rover Evoque Abio Phev A 1.5L Hybrid electric (clean) · BC72 ACO

The most recent MOT test conducted on 28 July 2026 resulted in a pass with no defects or advisories recorded. When evaluating the recent history, including the previous pass in January 2026, the vehicle demonstrates a stable maintenance trend regarding its regulatory compliance. The absence of recorded failures suggests that the primary safety-critical components, such as lighting, steering, and braking systems, have been meeting the required standards during recent inspections, indicating that the vehicle has been kept in a compliant state. The recorded mileage of 61,217 miles indicates that the vehicle has covered approximately 20,406 miles per year over its three-year lifespan. This is considered high usage for a relatively young vehicle and suggests frequent, long-distance driving. While consistent motorway use can be beneficial for the battery management systems in a plug-in hybrid, the high annual accumulation of mileage will inevitably lead to more rapid wear on mechanical consumables. You should be prepared for the fact that components such as suspension bushes, coil springs, and brake pads may be closer to their replacement intervals than they would be on a lower-mileage example. During your test drive, you should pay close attention to the vehicle's handling and auditory feedback. Listen for any clunks or knocks when driving over speed bumps or uneven road surfaces, which could indicate worn suspension bushings or failing dampers. Test the braking performance carefully; listen for any squealing or grinding and feel for any brake shudder or pulsation through the pedal, which may indicate warped brake discs or binding calipers. Additionally, inspect the tyres for uneven tread wear across the width of the tyre, as high mileage can often exacerbate alignment issues that lead to premature tyre degradation. Given the plug-in hybrid nature of this Evoque, it is essential to verify the condition of the electrical charging components and ensure the hybrid system transitions smoothly between electric and combustion modes. Check the service history thoroughly to confirm that oil changes and fluid replacements have been carried out strictly according to the manufacturer's schedule, as high-mileage engines are more sensitive to fluid degradation. You should also inspect the 12V battery health and ensure there are no signs of corrosion around the high-voltage connections or fluid leaks from the cooling systems associated with the hybrid drivetrain.