2024 Land Rover Rangerover TD6 Vogue Auto 3.0L Diesel · BDZ 4

The most recent DVSA MOT test for this 2024 Land Rover Range Rover TD6 Vogue Auto was conducted on 2024-06-14 and resulted in a pass, following a previous failure on 2024-06-13. Despite the anomalous failure in June 2024, the broader MOT history over the past four years shows no recurring mechanical defects or advisories, with all other tests passing without issue. The pattern suggests a stable maintenance regime, though the unexplained failure in June 2024 warrants further investigation, particularly if the vehicle was subjected to unusual stress or a specific fault was overlooked during that inspection. The absence of persistent issues implies that, while the vehicle may have encountered transient problems, its fundamental roadworthiness has remained consistent. The recorded mileage of 156,010 miles for a vehicle aged just two years represents a high annual usage rate of approximately 78,005 miles per year, which is notably elevated for a TD6 Vogue with its premium build and complex drivetrain. Such mileage accumulation typically accelerates wear on critical components such as the suspension system, particularly the coil springs, shock absorbers, and suspension bushes, which can degrade faster under high-frequency, high-load conditions. The drivetrain—including the torque converter, transmission, and differential—may also experience increased stress, potentially leading to premature fatigue in seals, bearings, or internal components. Additionally, the high mileage could indicate prolonged exposure to harsh driving conditions, such as frequent short trips without adequate warm-up, which can exacerbate engine oil degradation and lubricant breakdown in the drivetrain and suspension. Given the vehicle’s age and the high recorded mileage, prospective buyers should conduct a thorough mechanical inspection to identify signs of accelerated wear. Focus on the suspension system, paying particular attention to the condition of the coil springs, shock absorbers, and suspension bushes for signs of excessive play, cracking, or oil leakage. Listen for unusual clunking or rattling noises during cornering or over bumps, as these can indicate failing suspension components. The brakes should be inspected for uneven wear patterns, which may suggest misalignment or binding calipers, and check for corrosion or scoring on the brake discs and linings. The drivetrain should be examined for fluid leaks from the torque converter or transmission, and the differential area for signs of oil contamination or excessive wear. In addition to mechanical checks, buyers should verify the vehicle’s fluid levels and condition, particularly the engine oil, differential oil, and transmission fluid, as high mileage can accelerate degradation. The engine oil should be checked for metallic particles or a dark, gritty consistency, and the transmission fluid should be assessed for burnt smells or a burnt appearance, which could indicate internal damage. The 12V battery should be tested for voltage output and overall health, as prolonged use can lead to sulfation or reduced capacity. Finally, inspect the tyres for signs of sidewall cracking or perishing, which can occur even at moderate mileages due to age-related degradation, and ensure they meet the legal minimum tread depth of 1.6mm. If the vehicle has been stored for extended periods, check for standing corrosion on the undercarriage, particularly around the wheel arches and exhaust system, as moisture can accelerate rust formation. Lastly, verify the service history for any scheduled maintenance, such as the timing belt replacement (if applicable) or fluid refreshes, to ensure the vehicle has been properly serviced according to manufacturer recommendations.