2023 Volvo XC90 Ultimate T8 Rechrge AWD A 2.0L Hybrid electric (clean) · BN73 USS

A consistent record of clean roadworthiness defines this vehicle, with its latest MOT pass on 19 August 2026 showing no recorded defects. This indicates a history of meeting the minimum statutory safety standards without any flagged failures or advisories across its recorded testing period. The absence of any noted mechanical issues or structural concerns suggests that the components inspected during the most recent test were within the acceptable tolerances required for a pass. The vehicle exhibits a high-usage profile for its age, having covered 47,681 miles in approximately three years. This equates to an annual average of roughly 15,894 miles, which is significantly higher than the typical UK average for a premium SUV of this class. From a mechanical standpoint, this level of mileage suggests more frequent wear on consumable items such as brake pads, discs, and tyres, as well as increased stress on suspension components and drivetrain elements compared to a lower-mileage equivalent. Given the high annual mileage accumulation, a prospective buyer should focus their inspection on the wear and tear of the chassis and running gear. While the MOT record is currently clear of advisories, the mileage warrants a close examination of the suspension bushes, coil springs, and shock absorbers. During a test drive, listen for any dull knocks or clunks when traversing uneven surfaces or speed bumps, which could indicate worn suspension linkages or mounting points. Furthermore, the increased usage necessitates a thorough check of the braking system and tyre condition. Monitor the brake pedal for any signs of judder or pulsation under deceleration, which may indicate uneven disc wear, and ensure there is no pulling to one side during braking that could suggest a binding caliper. Although no specific defects were noted in the recent test, the high mileage profile means the physical condition of the tyre tread and the integrity of the suspension geometry should be verified to ensure they align with the clean MOT results.