2013 Ford Transit 2.2L Diesel · BP62 ACU

This 2013 Ford Transit has demonstrated a stable but borderline roadworthiness trend over the past year, with the most recent MOT test on 11 March 2026—just five months ago—confirming no defects despite a failure on 24 February 2026. The retest passing without issues suggests either a minor oversight in the initial inspection or a vehicle that, while not pristine, remains within legal limits for now. However, the February failure—albeit without recorded defects—indicates the tester may have identified a marginal condition that required correction before retesting. Buyers should note that the absence of advisories in recent tests implies no recurring or latent issues were flagged, but the proximity of the last test to the current date (August 2026) means some components may have approached their serviceable limits. The mileage accumulation of 163,237 miles over 13 years—averaging approximately 12,557 miles annually—is unusually high for a vehicle of this age, particularly given the sparse MOT history. The largest gap between tests spans 11 months (from March 2025 to February 2026), during which the vehicle covered 13,792 miles, a rate that would accelerate wear on suspension bushes, coil springs, and drivetrain components. The previous test in April 2023 recorded 145,623 miles, meaning over 17,000 miles were logged in just under a year—a pattern that suggests either heavy commercial use or inconsistent maintenance intervals. The lack of advisories in earlier tests does not mitigate the risk of accelerated wear on high-stress parts like brake calipers, exhaust systems, or steering linkages. Given this history, an in-person inspection should prioritise the structural integrity of the chassis and subframe, particularly around wheel arches and suspension mounts, where corrosion or fatigue could compromise safety. The suspension—especially rear coil springs and bushes—should be checked for uneven wear or binding, as high mileage often accelerates degradation in these areas. Brake discs and pads, while not explicitly failed, may require assessment for uneven thickness or glazing, given the rapid mileage accumulation. Exhaust emissions should also be scrutinised, as older diesel units are prone to catalytic converter clogging or turbocharger wear under heavy use. The absence of advisories does not preclude hidden issues, so attention to fluid levels (brakes, power steering, differential) and the condition of hoses, belts, and electrical connections is essential.