2023 Cupra Leon V1 TSI 1.5L Petrol · BV73 YBA

A spotless MOT record to date, confirmed by the pass on 1 September 2026 with no defects logged, means the car has not yet been recorded as presenting any roadworthiness issues that required corrective work. This clean history, combined with the absence of any advisory notes in earlier tests, suggests that any emerging problems have either not reached the MOT threshold or have been addressed before testing. At just under 30,000 miles after roughly three years of age, the average annual accumulation sits at about 9,900 miles, which aligns closely with typical usage for a modern hatchback. The mileage progression shows no large gaps between tests, indicating regular road exposure rather than prolonged storage. Mechanically, this level of use generally places consumables such as brake pads, tyre tread, and clutch components into the early‑to‑mid wear stage, while major drivetrain elements remain well within their design life. When you inspect the car, pay particular attention to the braking system: the pedal should feel firm without excessive travel, and there should be no pulsation or grinding noises when applying pressure. Examine the front and rear discs for uneven wear or scoring, and listen for any squeal that could indicate worn pads or glazed surfaces. Tyre tread depth should be measured across the width; uneven wear patterns may point to misaligned suspension or worn steering components. While the MOT has not flagged any suspension issues, a thorough drive over a variety of road surfaces should reveal any knocking or clunking from worn bushings, ball joints, or coil springs, especially when navigating bumps or taking corners. Finally, verify that the engine idle is smooth and free of abnormal noises, and watch for any exhaust smoke that could hint at oil consumption or valve problems. A visual check for oil leaks around the valve cover, oil filter housing, and under the chassis is prudent, even though none were recorded at MOT. Confirm that all lights, indicators, and the emissions control system operate correctly, and consider a professional pre‑purchase inspection to document the condition of these items before finalising the purchase.