2019 Vauxhall Combo 1.5L Diesel · BW19 GWK

The 2019 Vauxhall Combo presents a stable and improving mechanical trend, culminating in a clean pass at 76,495 miles on 29 April 2025. The absence of any recorded defects in the most recent test indicates the vehicle currently meets all required safety and emissions standards. Looking back, the maintenance trajectory is highly positive. The only blemish on the record is an anomalous failure logged on 2 May 2022 at 48,809 miles, which curiously lists no defects, yet a pass was achieved later that same day. Since that date, three consecutive annual tests have passed without a single advisory, suggesting the initial issue was promptly rectified and the vehicle has been consistently maintained. The recorded mileage aligns closely with typical usage for a vehicle of this age. Accumulating 76,495 miles over roughly seven years equates to an average of approximately 10,928 miles annually. The yearly intervals between tests show steady, predictable accumulation: 8,258 miles between April 2023 and April 2024, and 10,023 miles between April 2024 and April 2025. There are no significant gaps in the testing history or sudden spikes in mileage accumulation that would indicate prolonged standing or excessively high commercial use. Despite the pristine MOT record, a physical inspection remains essential to verify the structural integrity and mechanical condition of this commercial vehicle. Buyers should closely examine the suspension components, including the coil springs and suspension bushes, for signs of wear typical of a van that may have carried heavy loads. The underbody and wheel arches require thorough checking for corrosion, as surface rust can compromise structural soundness over time. Brake discs and pads should be measured for wear, ensuring no binding calipers are present, while the exhaust system must be inspected for leaks or deterioration that could cause future emissions failures. Tyre tread depth and condition must also be verified, as uneven wear could indicate underlying alignment or suspension geometry issues not captured during the MOT.