2023 Fiat 500 Mhev 1.0L Petrol · C4 HYW

A pattern of immediate failure and advisory issues regarding lighting and tyre wear defines the most recent inspection on 23 July 2026. The vehicle failed its MOT due to an incorrect offside front headlamp beam aim before subsequently passing with an advisory noting that both front inner tyres are worn close to the legal limit. While the record shows a recent pass, the presence of both a lighting failure and tyre wear advisories indicates that consumable components and alignment settings require immediate attention. The recorded mileage of 17,979 miles over approximately three years represents a relatively low annual accumulation of roughly 5,993 miles. This usage profile suggests the vehicle has not been subjected to high-frequency, long-distance motorway driving, which typically results in higher mileage. Mechanically, this lower usage rate often means less wear on heavy drivetrain components and suspension linkages, though it can sometimes correlate with shorter, urban journeys that place different stresses on the braking system and exhaust. Prospective buyers should focus specifically on the front axle geometry and tyre condition. The advisory regarding inner tyre wear on both sides is a significant indicator that the front wheel alignment or tracking is likely out of specification. On a test drive, pay close attention to the steering feel and stability; any pulling to one side or a wandering sensation at moderate speeds would confirm an alignment issue. Furthermore, the uneven wear on the inner edges suggests that the suspension bushes or tie-rod ends may need inspection to ensure they are not allowing excessive movement. The recent headlamp aim failure also warrants a physical check of the lighting assembly. Ensure that the beam pattern is correctly directed and that the headlamp adjustment mechanism is functional, as a failure in beam projection can sometimes stem from loose mounting brackets or damaged housings. Given the advisory on tyre wear, a thorough inspection of the remaining tread depth and the presence of any unevenness across the width of the tyre is necessary to determine if a full replacement and professional four-wheel alignment are required immediately.