2022 Porsche Macan 2.9L Petrol · C4 WDY

A relatively clean roadworthiness profile defines this vehicle, characterized by a consistent passing record with minimal recorded issues. The most recent test on 28 August 2026 resulted in a pass with no defects, showing an improvement from the previous inspection in April 2026 where an advisory was issued regarding rear tyre wear. This indicates that while the vehicle has encountered minor consumable wear, it has not demonstrated any recurring mechanical failures or structural integrity concerns throughout its documented MOT history. The recorded mileage of 27,319 miles against a four-year age profile suggests a moderate usage pattern of approximately 6,830 miles per year. This level of annual accumulation is consistent with typical UK driving habits and avoids the potential mechanical complications associated with extremely low mileage, such as excessive component seizure or fluid degradation from prolonged periods of inactivity. Conversely, the mileage is not high enough to suggest accelerated wear on heavy-duty drivetrain components or suspension linkages, placing the vehicle in a mid-range category for component longevity. Prospective buyers should pay specific attention to the tyre condition noted in the April 2026 advisory, which flagged the rear tyres as being worn close to the legal limit or worn on the edges on both the nearside and offside. This specific type of wear pattern often points toward alignment issues or uneven load distribution. During a test drive, it is essential to monitor the vehicle for any steering pull to either side or a tendency for the car to wander at motorway speeds, which could indicate that the wheel alignment or camber settings require adjustment. Beyond the tyre wear, the absence of any recorded defects regarding brake pipes, suspension bushes, or exhaust emissions suggests the primary mechanical systems have remained within operational parameters. However, given the advisory on tyre edges, a physical inspection of the tread depth and the condition of the suspension components should be conducted to ensure no uneven wear is being caused by worn bushings or dampers. Listen for any rhythmic thumping or unevenness in the ride quality when traversing uneven surfaces, as this would corroborate the findings of the previous tyre advisory.