2025 Omoda 5 Noble Auto Petrol · CA25 RXU

Without any recorded MOT examinations, there is no documented evidence of roadworthiness for this 2025 OMODA 5 Noble Auto. The absence of both pass and failure entries means that the vehicle’s compliance with the statutory safety and emissions standards cannot be confirmed, and no trend—whether stable, improving or deteriorating—can be established from official data. Mileage information is not supplied, so an assessment of annual kilometre accumulation or any gaps between testing intervals cannot be performed. Without a known odometer reading, the degree of wear on engine, transmission, and wear‑items such as tyres and brake components remains indeterminate, and any inference about mechanical condition based on usage patterns would be speculative. A prospective buyer should commission a full pre‑purchase inspection that covers the principal safety and durability systems. Examine the suspension for excessive play in the control arm bushes, worn or cracked coil‑spring mounts, and any audible clunk when traversing bumps. Verify that the steering rack operates smoothly without binding and that there is no noticeable steering pull under steady torque. Inspect the braking system for uneven pad wear, disc scoring, or fluid leakage from the brake pipes and caliper seals; a pulsating pedal or spongy feel may indicate hidden issues. Check the exhaust for cracks, excessive smoke, or abnormal noises that could point to leaks or engine mis‑fire, and confirm that the emissions control components (catalyst, oxygen sensors) appear intact. During a road‑test, listen for rattles from the under‑carriage that could betray loose sub‑frame mounts or rust‑induced corrosion, feel for any vibration through the steering column that might signal worn tie‑rod ends, and monitor the engine for rough idling, loss of power, or coolant leaks at the radiator and hoses. Because no MOT record exists, obtaining a fresh MOT before finalising the purchase is advisable; this will provide an authoritative baseline of compliance and highlight any defects that the visual inspection may have missed.