2019 Dacia Sandero 1.0L Petrol · CA69 FEK

The 2019 Dacia Sandero presents a stable and consistently clean roadworthiness record. The most recent MOT, conducted on 16 April 2026 at 45,459 miles, passed with zero defects recorded. This outcome is not an isolated result but the continuation of a five-year unbroken streak of first-time passes with no advisories or failures, indicating diligent routine maintenance and no developing mechanical or structural concerns. The mileage accumulation is notably uneven, revealing two distinct phases of use. Between 17 February 2023 at 19,044 miles and 14 February 2024 at 25,285 miles, the car covered roughly 6,241 miles in twelve months, a modest pace. However, the subsequent period from 14 February 2024 to 16 April 2026 shows a sharp increase of approximately 20,174 miles over just over two years, equating to an average of nearly 9,500 miles per annum. This recent uptick in annual mileage suggests a shift to heavier daily use, which accelerates wear on consumable components like brake discs, pads, tyres, and suspension bushes, even though the latest test found no faults. Despite the clean MOT record, the recent increase in mileage warrants a focused physical inspection. A buyer should closely examine the condition of the front brake discs and pads, the rear brake calipers for any sign of binding, and the tyre tread depths and sidewalls for uneven wear. The suspension setup, particularly the front lower suspension arms, anti-roll bar linkages, and rear beam bushings, should be checked for play or deterioration given the additional mechanical stress from the higher recent mileage. Underneath, inspect the exhaust system for corrosion, paying close attention to the silencer and any visible welding repairs. Check the subframes, sills, and wheel arches for any signs of surface or structural corrosion, which is a key long-term integrity concern on this model. While the electronic systems and emissions controls have consistently tested without issue, a live diagnostic scan is still advisable to confirm no pending fault codes exist that may not have triggered a test failure.