2009 Ford Fiesta 1.6L Petrol · CE09 HAA

The vehicle currently presents as roadworthy following a successful MOT on 1 December 2025 at 125,535 miles. The maintenance trend appears to be improving after a period of instability. A significant failure occurred just ten days prior on 21 November 2025, where a major rear exhaust leak prevented emissions testing. The subsequent pass suggests the exhaust system was repaired or replaced, resolving a critical fault that would have otherwise prevented a certificate of roadworthiness. The mileage accumulation is consistent with a vehicle of this age, averaging approximately 7,384 miles per year. The record shows steady usage, with a notable jump of roughly 5,000 miles between the May 2021 and December 2021 tests, followed by more gradual increases. There are no significant periods of long-term stationary use evident in the data, though the gap between the March 2024 and December 2025 tests indicates a period of roughly 21 months where no official testing was recorded, which is worth noting for continuity. A buyer should focus physical inspections on the suspension and steering components, as these have shown recurring issues. The 2021 tests flagged multiple failures involving track rod ends, anti-roll bar linkages, and ball joints, suggesting the front-end geometry and bushings may be nearing the end of their service life. Previous records from 2017 and 2018 also highlighted broken and corroded rear coil springs, so the condition of the rear suspension assembly warrants a close look for signs of fatigue or recent replacement. The history also reveals a pattern of neglected consumables, specifically tyres and lighting. Multiple tests between 2019 and 2021 identified tyres worn to or below legal limits and various bulb failures. While the most recent test shows no defects, the tendency for the previous owner to run components to the point of failure suggests that while the car is currently compliant, a thorough check of all rubber components, wiper blades, and light housings is necessary to ensure immediate reliability.