2008 Skoda Fabia 1.9L Diesel · CK58 CZY

The vehicle remains roadworthy, but the maintenance trend shows a gradual decline in suspension and tyre component management. While the most recent test in August 2025 at 163,958 miles resulted in a pass, it flagged a nearside front inner tyre worn near the legal limit. This follows a pattern of mechanical wear noted in previous years, suggesting that while the car is kept on the road, components are often addressed only when approaching failure rather than through preventative maintenance. At 163,958 miles, the Fabia has averaged approximately 9,100 miles per year, which aligns with typical usage patterns for a vehicle of this age. The mileage accumulation is consistent, with roughly 13,500 miles covered between September 2023 and August 2024, and another 7,000 miles between August 2024 and August 2025. This steady usage indicates the car has not sat stationary for long periods, but the high total mileage places significant stress on the aging rubber bushings and drivetrain components. A buyer must prioritize a physical inspection of the front suspension geometry. The record shows recurring issues with ball joints, specifically the lower suspension arm ball joint noted in 2023 and the offside front track rod end flagged in 2024. These faults indicate developing play in the steering and suspension-link assemblies. Additionally, the misted nearside rear shock absorber recorded in 2023 should be checked to ensure the leak has not progressed to a significant failure that would require replacement. Tyre condition is also a point of concern given the 2022 failure for exposed cords and perishing, followed by the 2025 advisory for uneven wear on the inner edge. The buyer should check for consistent wear across both axles, which would indicate alignment issues or worn suspension components. Given the age of the vehicle, a thorough check of the chassis for structural corrosion on the sills and arches is essential as the MOT record does not detail the state of the metalwork beyond the standard pass/fail criteria.